한국생산제조학회 학술지 영문 홈페이지
[ Special Issue : Engineering Design of ADBL ]
Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 29, No. 3, pp.227-234
ISSN: 2508-5107 (Online)
Print publication date 15 Jun 2020
Received 09 Apr 2020 Revised 09 May 2020 Accepted 13 May 2020
DOI: https://doi.org/10.7735/ksmte.2020.29.3.227

운동화 중창의 작업 자동화를 위한 인라인 3D 스캐너 개발

김성환a ; 이유나a ; 송성재b, *
In-line 3D Scanning System for Automated Manufacturing of Injected Shoe Midsole
Sung Hwan Kima ; Yuna Leea ; Sung Jae Songb, *
aDepartment of Mechanical System Design Engineering, Seoul National University of Science and Technology
bDepartment of Mechanical Engineering, Gangneung-Wonju National University

Correspondence to: *Tel.: +82-33-760-8743 E-mail address: sjsong@gwnu.ac.kr (Sung Jae Song).

Abstract

A shoe midsole is manufactured by the phylon mold method in which each product is manufactured successively with differing dimensions due to deformation, and it hinders the automation of shoe manufacture with issues such as size inspection or cement spraying. To address this drawback, it is necessary to perform real-time 3D scanning of the inline conveyor. For the footwear industry, a 3D scanner should have the necessary precision, reasonable cost, and processing speed higher than a commercially available 3D scanner. The optical non-contact method with a line laser is adopted for 3D shape measurement. A laser stripe extraction method and a mathematical model for constructing 3D information are proposed. Unique jig shape and a mathematical method for estimating machine parameters are also expressed. The method of extracting meaningful features from the acquired point cloud and treating the abnormal data in toe and heel is discussed.

Keywords:

Shoe midsole, Inline 3D scanning, Laser stripe extraction, Point cloud reconstruction, Feature of point cloud

Acknowledgments

이 논문은 2020년도 정부(산업통상자원부)의 재원으로 한국산업기술진흥원의 지원을 받아 수행된 연구임(P0008473, 2020년 산업혁신인재성장지원사업).

References

  • Yoo, H., Joo, J., 2015, Evaluation of the Moire Pattern in Accordance with LED Wavelength, Annual Conference of Korean Society of Mechanical Engineers, 1609-1611..
  • Baik, S. H., Park, S. K., 2005, Shape Measurement by Using Optical Triangulation, Journal of the Korean Society of Precision Engineering, 22 13-18..
  • Lee, J. Y., Kim, S. W., 1992, Design of a Non-contact Type Displacement Measurement System Based on Optical Triangulation Method, The Korean Society of Mechanical Engineers, 15 1030-1035..
  • Kyung, S. R., Kim, J. B., Jeon, B. R., Kim, S. H., 2015, 3D Scanning Using Fringe Pattern Projection, Autumn Annual Conference of the Korean Society of Manufacturing Technology Engineers, 120..
  • Lee, M. G., Kim, J. W., Jo, S. E., 2013, Proper Usage and Limitation of 3D Time of Flight Camera, Spring Annual Conference of the Korean Society for Precision Engineering, 177-178..
  • Lee, S. Y., Kang, H. S., Cha, M. C., et.al., 2018, A Study of Nut Loosening Inspection System using a Vision Machine Method, Journal of the Korean Society of Manufacturing Technology Engineers, 27:1 35-40.. [https://doi.org/10.7735/ksmte.2018.27.1.35]
  • Steger, C., 1998, An Unbiased Detector of Curvilinear Structures, IEEE Trans. Pattern Anal. Mach. Intell., 20:2 113-125.. [https://doi.org/10.1109/34.659930]
  • Subbarao, M., Choi, T., 1995, Accurate Recovery of Three-dimensional Shape From Image Focus, IEEE Trans. Pattern Anal. Mach. Intell., 17:3 266-274.. [https://doi.org/10.1109/34.368191]
  • Usamentiaga, R., Molleda, J., García, D. F., 2012, Fast and Robust Laser Stripe Extraction for 3D Reconstruction in Industrial Environments, Mach. Vis. Appl., 23:1 179-196.. [https://doi.org/10.1007/s00138-010-0288-6]
  • Li, Y., Zhou, J., Huang, F., Liu, L., 2017, Sub-Pixel Extraction of Laser Stripe Center Using an Improved Gray-Gravity Method, Sensors, 17:4 814.. [https://doi.org/10.3390/s17040814]
  • Sun, Q., Chen, J., Li, C., 2015, A Robust Method to Extract a Laser Stripe Centre Based on Grey Level Moment, Optics and Lasers in Engineering, 67 122-127.. [https://doi.org/10.1016/j.optlaseng.2014.11.007]
  • Akima, H., 1970, A New Method of Interpolation and Smooth Curve Fitting Based on Local Procedures, J. ACM, 17:4 589-602.. [https://doi.org/10.1145/321607.321609]
  • Fisher, R. B., Naidu, D. K., 1996, A Comparison of Algorithms for Subpixel Peak Detection, Image Technology, 385-404.. [https://doi.org/10.1007/978-3-642-58288-2_15]
  • Chen, Y. Y., Chang, R. S., Jwo, K. W., Hsu, C. C., Tsao, C. P., 2015, A Non-Contact Pulse Automatic Positioning Measurement System for Traditional Chinese Medicine, Sensors, 15:5 9899-9914.. [https://doi.org/10.3390/s150509899]
  • Lee, B. Y., Nguyen, H. C., 2015, Development of Laser-vision System for Three-dimensional Circle Detection and Radius Measurement, Optik, 126:24 5412-5419.. [https://doi.org/10.1016/j.ijleo.2015.09.131]
  • Nguyen, H. C., Kim, D. J., Lee, B. R., 2017, Study on the 3D Assembly Inspection of Two-Step Variable Valve Lift Modules Using Laser-Vision Technology, Journal of mechanical science and technology, 41:10 949-957..
  • Ko, Y. J., Lee, S. Y., Lee, J. O., 2016, Development of 3D Scanner Based on Laser Structured-light Image, Journal of Institute of Control, Robotics and Systems, 22:3 186-191.. [https://doi.org/10.5302/J.ICROS.2016.15.0204]
Sung Hwan Kim

Professor in the department of Mechanical System Design Engineering, Seoul National University of Science and Technology.His research interest is Manufacturing system and machine vision.

E-mail: sunghwan@seoultech.ac.kr

Yuna Lee

Graduate student in the department of Mechanical System Design Engineering, Seoul National University of Science and Technology.Her research interest is machine vision and deep learning

E-mail: lyn2344@seoultech.ac.kr

Sung Jae Song

Professor in the department of Mechanical Engineering, Gangneung- Wonju National University.His research interest is Mechanism design.

E-mail: sjsong@gwnu.ac.kr