사출성형해석을 이용한 ASTM 굴곡시편의 사출조건 결정방법 연구
Abstract
An essential condition for minimizing the cost of quality loss by mass-producing high-quality injection molded products in a short period is the optimization of the injection process condition. As an ASTM D790 flexural strength specimen of PA46 TW341 raw material, molding analysis was performed using the Taguchi method and Minitab to determine the injection weight, which is a factor for optimal quality condition. In addition, the quality of the flexural strength of the specimen was verified by injection molding into the specimen mold and conducting a flexural strength test. The optimum conditions, such as injection time, injection pressure, holding pressure, and holding pressure time, which are key factors of injection molding, were predicted and verified. Good quality was confirmed by evaluating the flexural strength of the injection-molded specimen.
Keywords:
Injection conditions, Taguchi methods with Minitab, Injection molding analysis, ASTM D790 flexural specimenReferences
- ASTM, 2010, Standard Test Methods for Flexural Properties of Unreinforced and Reinforced Plastics and Electrical Insulating Materials, ASTM D790-10:2010, United States.
-
Choi, B. J., Kang, I. J., Jeon, Y. H., Hong, M. S., 2018, Deformation Analysis for Injection Molding of Lower Stiffener in Automobile Bumper, J. Korean Soc. Manuf. Technol. Eng., 27:6 564-569
[https://doi.org/10.7735/ksmte.2018.27.6.564]
-
Jin, J. W., Choi, C. W., Chang, B. C., Kim, Y. K., 2018, Stiffness Evaluation of Hybrid Control Arm with Metal and Plastic Insert Injection, J. Korean Soc. Manuf. Technol. Eng., 27:6 511-516
[https://doi.org/10.7735/ksmte.2018.27.6.511]
- Kim, K. H., 2009, Development and Its Application of a Robust Design Methodology for Plastic Injection Molding, Doctoral Dissertation, Kumoh National Institute of Technology, Republic of Korea.
- Kwon, Y. S., Kwak, J. S., Jeong, Y. D., 2006, Optimization of Injection Molding Process for Gear Using Design of Experiments, Proc. Korean Soc. Precis. Eng. Autumn Conf., 113-114.
- DSM Engineering Plastics Korea, n.d., viewed 10 June 2021, Material Specification StanylⓇ TW341, <https://plasticsfinder.com/datasheet/Stanyl®%20TW341/V67x4, >
- Engineering Standard, 2018, PA Low Friction/Wear Resistance Materials, Material Specification MS211-66, Hyundai-Kia Moters company, Republic of Korea.
- Kim, W., Lee, S., 1998, CAE Applications in Injection Molding and Its Software, Polym. Sci. Technol., 9:4 283-292.
- Whang, H. S., 2016, Tools for Successful Injection Molding, Kijeon Publisher, Korea.
-
Shoemaker, J., 2006, Moldflow Design Guide: A Resource for Plastics Engineers, Hanser Publications, München, Germany.
[https://doi.org/10.3139/9783446418547.fm]
- Lee, S. B., 2017, Taguchi Method using Minitab, Eretech, Republic of Korea.
- Gastrow, H., 1993, Injection Molds 108 Proven Designs, Hanser Publications, München, Germany.
Graduate student in the Department of MIED, Daejin university.His research interest is injection mold design and injection molding manufacturing.
E-mail: kblplart@daum.net
Graduate student in the Department of MDEIS, Daejin university.Her research interest is the development of a mold quality certification system platform
E-mail: soohyun@daejin.ac.kr
Professor in the ME, Daejin university.His research interests are metal forming and injection molding of automobile parts, and Intellectual property.
E-mail: hhkwon@daejin.ac.kr