[ Article ]

Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 32, No. 4, pp.227-234

ISSN: 2508-5107 (Online)

Print publication date 15 Aug 2023

Received 14 Jun 2023 Revised 11 Aug 2023 Accepted 14 Aug 2023

DOI: https://doi.org/10.7735/ksmte.2023.32.4.227

유한요소해석을 이용한 함정용 진동저감 간이 모사시험장치의 정합성 검증

정안목^a ; 김도영^b ; 손성완^b ; 박영철^c ; 이학준^a^{, *}

Validation of a Simple Simulation Test Equipment for Ship Vibration Reduction using Finite Element Analysis

Anmok Jeong^a ; Doyoung Kim^b ; Sungwan Son^b ; Young-Cheol Park^c ; Hak-Jun Lee^a^{, *}

aDepartment of Smart Manufacturing R&D System, Korea Institute of Industrial Technology
bR&D Center, RMS Technology
cDivision of Software, Yonsei University

Correspondence to: ^*Tel.: +82-42-589-855 E-mail address: hak1414@kitech.re.kr (Hak-Jun Lee).

Abstract

Technological developments to reduce underwater noise caused by equipment vibration on ships are essential to improve the operational capability and ensure the survivability of ships. Accordingly, several studies have been carried out to reduce the vibrations generated by mounted equipment. In this study, a finite element model was developed to predict the dynamic characteristics and control effects of a simple simulation test equipment designed to simulate the operating states of a ship. The predicted results were compared with the experimental results obtained from the fabricated test equipment to verify the accuracy of the model. The double elastic support model of the test equipment was designed using shell elements. The vertical and horizontal stiffnesses of the mount were defined using the Bushing Joint component. The dynamic characteristics and vibration reduction effects predicted by the active assembly of the finite element model showed good agreement with those observed from experiments.

Keywords:

Structure-borne noise, Vibration reduction, Pasive mount, Finite element analysis, Active assembly

Acknowledgments

이 연구는 2022년 정부(방위사업청)의 재원으로 국방과학연구소의 지원을 받아 진행된 연구임(UC210001DD).

References

Han, H. S., Son, Y. J., 2009, Numerical Analysis of the Mechanical Impedance and Transmitted Vibration of the Foundation for the Equipment in a Naval Vessel, Transactions of the Korean Society for Noise and Vibration Engineering, 19:5 462-467. [https://doi.org/10.5050/KSNVN.2009.19.5.462]
Han, H. S., Son, Y. J., 2009, Investigation for the Restriction of the Stiffness and Mechanical Impedance of the Shipboard Floor and Foundation Considering Dynamic, Stiffness of the Anti-vibration Mount, Proc. Korean Society for Noise and Vibration Engineering Conference, 511-517.
Lee, H. H., Lee, M. G., Kim, K. H., Kim, T. G., Lee, S. W., Kim, H. Y., 2018, Study of Reaction Force Compensation and Active Vibration Isolation System with a Stage, Proc. Korean Soc. Manuf. Technol. Eng. Autumn Conf., 65.
Kim, B. K., Kim, J. S., Kim, H. S., Kim, H. J., Kim, S. R., 2000, Study on the Structure-borne Sound Transmission of a Machine through Rubber Mounts, Proc. Korean Society for Noise and Vibration Engineering Autumn Conf., 655-660.
Ji, Y. J., Kwak, J. S., Lee, H. Y., Kim, S. C., 2015, Optimal Arrangement of Resilient Mount installed on Frame Support Structure at Shipboard Equipment under Shock Load, Journal of the Society of Naval Architects of Korea, 52:4 298-304. [https://doi.org/10.3744/SNAK.2015.52.4.298]
Kim, H. S., Kim, J. S., Kang, H. J., Kim, B. K., Kim, S. R., 2007, SBN(Structure-borne Noise) Reduction of Resiliently Mounted Machinery and Effect of Foundation Impedance, Proc. Korean Society for Noise and Vibration Engineering Spring Conf., 423-426.
Han, H. S., Lee, K. H., Park, S. H., 2015, Design of the Base for the Onboard Installed Equipment to Minimize Structure-borne Noise, Transactions of the Korean Society for Noise and Vibration Engineering, 25:6 432-439. [https://doi.org/10.5050/KSNVE.2015.25.6.432]
Moon. S. J., Choi, S. M., Jeong, J. A., Choi, S. B., Jung, W. J., Koo, J. Y., 2010, A Study on Development of an Active Hybrid Mount for Naval Shipboard Equipment, Transactions of the Korean Society for Noise and Vibration Engineering, 20:7 685-692. [https://doi.org/10.5050/KSNVE.2010.20.7.685]

Anmok Jeong

Researcher in the Department of Smart Manufacturing R&D System, Korea Institute of Industrial Technology. His research interest is Mechanical Design of Semiconductor Equipment.

E-mail: amjeong@kitech.re.kr

Doyoung Kim

Senior Researcher of Research Institude, RMS Technology Ltd. His research interest is Dynamic Analysis using F.E.M..

E-mail: dykim@rmstech.co.kr

Sungwan Son

Director of Research Institude, RMS Technology Ltd. His research interest is Vibration Control.

E-mail: swson@rmstech.co.kr

Young-Cheol Park

Professor, Software Division, Yonsei University, Mirae Campus. His research interests include Active Noise/Vibration Control, Deep Learning-based Signal Processing.

E-mail: young00@yonsei.ac.kr

Hak-Jun Lee

Senior Researcher in the Department of Smart Manufacturing R&D System, Korea Institute of Industrial Technology. His research interest is Precision Motion Mechanism and Semiconductor/Display Equipment.

E-mail: hak1414@kitech.re.kr