한국생산제조학회 학술지 영문 홈페이지
[ Papers ]
Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 29, No. 4, pp.317-322
ISSN: 2508-5107 (Online)
Print publication date 15 Aug 2020
Received 18 May 2020 Revised 03 Jul 2020 Accepted 23 Jul 2020
DOI: https://doi.org/10.7735/ksmte.2020.29.4.317

파인 블랭킹 기술을 적용한 자동차 엔진용 VCT 플레이트 부품의 암 취출 방식

박동환a, * ; 권성민b ; 김희정b
Arm Extraction Method of VCT Plate Parts for Automobile Engines using Fine Blanking Technology
Dong Hwan Parka, * ; Sung Min Kwonb ; Hee Jung Kimb
aMaterials Performance Evaluation Department, Gyeongbuk Hybrid Technology Institute
bR&D Center, Kyung Chang Precision Co., Ltd.

Correspondence to: *Tel.: +82-54-330-8045 E-mail address: pdh@ghi.re.kr (Dong Hwan Park).

Abstract

VCT plate parts for automobile engines are wear-resistant and consist of an inner plate and an outer plate. Most of the existing fine blanking parts use a method of ejecting the product by air at high pressure in the mold, resulting in product defects due to damage and scratching as the product falls. However, this study uses an arm extraction method, moving the product using the arm that guides the product outward in the mold. We conducted a study on the extraction methods of VCT outer plate parts for automobile engines by applying fine blanking technology, and developed an arm extrusion method using 2-cavity die technology for fine blanking to produce VCT outer plate parts.

Keywords:

VCT plate parts, Extraction method, Automobile engine, Fine blanking, Thick steel sheet

References

  • Han, K. T., 1999, A Study on the Forming of Parts for Automobile using Fine Blanking Process, Journal of the Korean Society of Machine Tool Engineers, 8:2 56-61.
  • Park, D. H., Kwon, H. H., 2016, Study on the Manufacturing Technology of 2-Cavity Fine Blanking Seat Recliner Die with Minute Module of Accurate Gear, Journal of the Korean Society of Manufacturing Process Engineers, 15:2 22-30. [https://doi.org/10.14775/ksmpe.2016.15.2.022]
  • Kim, J. D., Kang, J. J., Kim, H. K., Hong, S. K., Kim, B. J., 2005, A Progressive Fine Blanking Process Design for Forming of Carrier Plate, Transactions of Materials Processing, 14:3 207-214. [https://doi.org/10.5228/KSPP.2005.14.3.207]
  • Kim, J. D., Kim, H. K., 2011, A Study on the Change of Die Roll Size by the Shape of Die Chamfer in Fine Blanking Die for Automobile Door Latch, Journal of the Korea Academia-industrial Cooperation Society, 12:2 565-570. [https://doi.org/10.5762/KAIS.2011.12.2.565]
  • Kim, J. D., 2012, An Experimental Study on the Effect of V-ring Position and Die Chamfer Shape on the Die Roll Height in Fine Blanking Tool, Journal of the Korea Academia-industrial Cooperation Society, 13:5 2009-2014. [https://doi.org/10.5762/KAIS.2012.13.5.2009]
  • Lee, C. K., Y. Kim, C. A., 2013, A Study on the Share Surface Size Deformation of Fine Blanking Process, Journal of the Korea Academia-industrial Cooperation Society, 14:8 3650-3655. [https://doi.org/10.5762/KAIS.2013.14.8.3650]
  • Kim, G. T., 2013, A Study on Edge Bridge Minimization of Fine Blanking Process, Journal of the Korean Society of Manufacturing Technology, 12:4 108-113.
  • Park, D. H., Kwon, H. H., 2015, Development of the Compound Die Forming Technology United between Semi-Progressive and Transfer Die, Journal of the Korean Society of Manufacturing Process Engineers, 14:4 126-133. [https://doi.org/10.14775/ksmpe.2015.14.4.126]
  • Bahn, G. S., Suh, E. K., Lee, G. H., Mo, C. K., 2004, A Study on the Characteristics for the Blanking of Lead Frame with the Nickel Alloy Alloy42, Journal of the Korean Society of Machine Tool Engineers, 13:6 87-93.
Dong Hwan Park

Head researcher in the Materials Performance Evaluation Department, Gyeongbuk Hybrid Technology Institute.His research interests are Sheet Metal Forming, Hot and Cold Complex Forging for Automobile Parts.

E-mail: pdh@ghi.re.kr

Sung Min Kwon

Deputy in the R&D Center, Kyung Chang Precision Co., Ltd.His research interest is Fine Blanking for Automobile Parts.

E-mail: skysung1234@kccaster.co.kr

Hee Jung Kim

Director in the R&D Center, Kyung Chang Precision Co., Ltd.His research interests are Fine Blanking, Sheet Metal Forming for Automobile Parts.

E-mail: heejung2910@kc.co.kr