한국생산제조학회 학술지 영문 홈페이지
[ Papers ]
Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 29, No. 5, pp.361-369
ISSN: 2508-5107 (Online)
Print publication date 15 Oct 2020
Received 09 Aug 2020 Revised 22 Aug 2020 Accepted 28 Aug 2020
DOI: https://doi.org/10.7735/ksmte.2020.29.5.361

Robust Design and Tolerance Simulation of Bolt-fastening Axial Force-monitoring Washer using FEM Analysis

Joon Soo Kima ; Won Tae Kwona, *
aMechanical and Information Eng. Dept., Univ. of Seoul

Correspondence to: *Tel.: +82-2-6490-2386 E-mail address: kwon@uos.ac.kr (Won Tae Kwon).

Abstract

When fixing a structure using bolts, it is crucial to apply sufficient bolt axial force. Hence, several methods have been proposed to measure the applied axial force exerted on the bolt. However, these methods are either expensive or complicated. To overcome these problems, we proposed a method to measure the axial force by analyzing the change in shape of the washer. The basic shape of the washer was designed using a commercial software and redesigned into the most robust form according to the change in tolerance while measuring a force of 200 kN. To achieve this, the sensitivity and interaction of each parameter was examined to determine the appropriate parameter values. The adequacy of the final model was verified using the additive model and Monte Carlo method. The result s proved that the proposed model had high reliability and robustness.

Keywords:

Bolt axial force, Monitoring, Washer, Tolerance simulation, Robust design

Acknowledgments

This work was supported by the 2019 Sabbath Professor Research Fund of the University of Seoul.

References

  • Ren, L., Feng, T., Ho, M., Jiang T., Song G., 2018, A Smart “Shear Sensing” Bolt Based on FBG Sensors, Measurement, 122 240-246. [https://doi.org/10.1016/j.measurement.2018.03.026]
  • Yin, H., Wang, T., Yang, D., Liu, S., Shao, J., Li Y., 2016, A Smart Washer for Bolt Looseness Monitoring Based on Piezoelectric Active Sensing Method, Applied Scinece, 6 320. [https://doi.org/10.3390/app6110320]
  • Yang, J., Chang, F. K., 2006, Detection of Bolt Loosening in C–C Composite Thermal Protection Panels: I. Diagnostic Principle, Smart Materials and Structures, 15 580-590. [https://doi.org/10.1088/0964-1726/15/2/041]
  • Amerini, F., Barbieri, E., Meo, M., Polimeno, U., 2009, Nonlinear Vibration method to Detect Imperfectly Contact Interfaces in Composite Beams, ICCM International Conferences on Composite Materials, 170 602-610.
  • Wallace, I. W., 2013, Direct Tension Indicator(DTI) Washer, US Patent: US8382409B2.
  • Phadke, M. S., 1989, Quality Engineering Using Robust Design, Prentice Hall PTR.
  • Lee, J. H., Sin, D. H., Kim, S. K., 2018, Dynamic Analysis of a High-Speed Winding Machine by Changing Design Parameters, Journal of the Korean Society of Manufacturing Technology Engineers, 27:2 112-119. [https://doi.org/10.7735/ksmte.2018.27.2.112]
  • Lim, H. B., Kim, C. W., Yang, H. I., 2019, Chattering Analysis of Cold Rolling Mill Based on the Design of an Experiment, Journal of the Korean Society of Manufacturing Technology Engineers, 28:6 406-412. [https://doi.org/10.7735/ksmte.2019.28.6.406]
  • Rout, B. K., Mittal, R. K., 2006, Tolerance Design of Robot Parameters Using Taguchi Method, Mech. System and Signal Processing, 20:8 1832-1852. [https://doi.org/10.1016/j.ymssp.2005.08.017]
  • Mahmood, S., Qureshi, A. J., Talamona, D., 2018, Taguchi Based Process Optimization for Dimension and Tolerance Control for Fused Deposition Modelling, Additive manufacturing, 21 183-190. [https://doi.org/10.1016/j.addma.2018.03.009]
  • Goetz, S., Schleich, B., Wartzack, S., 2018, A New Approach to First Tolerance Evaluations in the Conceptual Design Stage Based on Tolerance Graph, Procedia CIRP 75 167-172. [https://doi.org/10.1016/j.procir.2018.04.030]
Joon Soo Kim

M.Sc. in the Department of Mechanical and Information Engineering, University of University.His research interest is Optimization of design

E-mail: chexary6@uos.ac.kr

Won Tae Kwon

Professor in the Department of Mechanical and Information Engineering, University of University.His research interest is micro machining and machining process optimization

E-mail: kwon@uos.ac.kr