한국생산제조학회 학술지 영문 홈페이지
[ Best Paper of This Month ]
Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 30, No. 1, pp.68-73
ISSN: 2508-5107 (Online)
Print publication date 15 Feb 2021
Received 23 Nov 2020 Revised 06 Jan 2021 Accepted 20 Jan 2021
DOI: https://doi.org/10.7735/ksmte.2021.30.1.68

전기자동차 알루미늄 이종소재의 하이브리드 Clinching 접합특성에 따른 기계적 특성

정진욱a ; 김성재a, * ; 이선빈a ; 심우정b ; 김병규b
Mechanical Properties of Hybrid Clinching Joints of Dissimilar Aluminum in Electric Vehicles
Jin-Uk Junga ; Seong-Jae Kima, * ; Sun-Bin Leea ; Woo-Jeong Simb ; Byeong-Gyu Kimb
aDepartment of Mechanical Eng., The Graduate School of Dong-A University
bAssistant Manager in the Advance Technical Team, SAEHAN

Correspondence to: *Tel.: +82-51-200-5716 E-mail address: sjkim641@dau.ac.kr (Seong-Jae Kim).

초록

Recently, in the automobile industry, the development of technology that can satisfy environmental regulations and fuel economy reduction requirements due to vehicle weight is an important topic. To solve this issue, vehicle-body weight reduction technology is a promising solution. To reduce the vehicle weight, automobiles with a large amount of aluminum use general wire welding (MIG, TIG) to bond aluminum components to each other. However, for complex three-dimensional shapes and dissimilar materials, traditional welding methods of inducing metal bonding and joining access are difficult to implement. Therefore, in such cases, joining techniques should be used. In this study, the mechanical properties of clinching joints without rivets are studied among various mechanical joint methods for weight reduction.

Keywords:

Hybrid clinching joint, Dissimilar material, Aluminum alloy, Interlock

Acknowledgments

이 논문은 2020년도 정부(산업통산자원부)의 재원으로 한국산업기술진흥원의 지원을 받아 수행된 연구임(P0002092, 2020년 산업혁신인재성장지원사업).

References

  • Hwang, B. N., Lee, C. J., Kim, J. Y., Lee, S. K., Ko. D. C., Kim, B. M., 2009, Effect of Frictional Characteristics of Adhesive in Hybrid-clinching Process, The Korean Society of Mechanical Engineers Spring Conference, 119-122.
  • Jung, C. G., Kim, T. J., Yang, D. Y., 2004, Form-joining Process with the Aid of Adhesive for Joining of Sheet Metal Pair, Trans. Mater. Process., 13:4 342-349, [https://doi.org/10.5228/KSPP.2004.13.4.342]
  • Lee, Y. B., Park, Y. K., Jeong, J. S., Kim, H. K., 2000, An Experimental Study on the Strength Evaluation of Mechanical Press Joint, Trans. Korean Soc. Mech. Eng. A, 24:2 438-448, [https://doi.org/10.1515/labm.2000.24.10.438]
Jin-Uk Jung

Graduate student in the Department of Mechanical Engineering, Donga University.His research interest is Structural Analysis

E-mail: jjw8608@gmail.com

Seong-Jae Kim

Professor in the Department of Mechanical Engineering, Donga University.His research interest is Fracture Mechanics.

E-mail: sjkim641@dau.ac.kr

Sun-Bin Lee

Graduate student in the Department of Mechanical Engineering, Donga University.His research interest is Structural Analysis

E-mail: dolkong93@naver.com

Woo-Jeong Sim

Assistant Manager in the Advance Technical Team, Saehan Industrial Co., Ltd.His research interest is Material Engineering

E-mail: swj1207@saehani.com

Byeong-Gyu Kim

Manager in the Design Team, Saehan Industrial Co..His research interest is Forming Analysis

E-mail: bgkim@saehani.com