한국생산제조학회 학술지 영문 홈페이지
[ Papers ]
Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 30, No. 5, pp.382-388
ISSN: 2508-5107 (Online)
Print publication date 15 Oct 2021
Received 05 Apr 2021 Revised 08 Jul 2021 Accepted 28 Jul 2021
DOI: https://doi.org/10.7735/ksmte.2021.30.5.382

섬유배향함수에 따른 복합재료의 인장강도 시험에서 온도분포 측정

김진우a, *
Measurement of Temperature Distribution in the Tensile Strength Test of Composites According to Fiber Orientation Functions
Jin-Woo Kima, *
aDepartment of Mechanical Engineering, Chosun University

Correspondence to: *Tel.: +82-62-230-7014 E-mail address: jinu763@chosun.ac.kr (Jin-Woo Kim).

Abstract

Composite materials are used in parts that require light-weight. In order to select a constituent material for mechanical parts by maintaining the requirements, namely, light-weight and strong, its mechanical behavior must be sufficiently investigated. Therefore, we used an infrared thermal imaging camera to measure the change in temperature with load during the tensile strength test. We also proposed a method to analyze the temperature distribution when the crack progresses during fracture. To measure subtle temperature changes, we applied the lock-in method. The mechanical properties of composite materials are known through the tensile strength test; however, we consider other correlations by measuring temperature distribution of the specimen according to the fiber orientation and content change. The relationship between fracture time and temperature was identified through infrared thermal image analysis of the properties of composite materials. This relationship will useful in tensile tests to analyze composite materials’ properties.

Keywords:

Fiber content, Fiber-reinforced composites, Infrared thermography, Fiber orientation function, Fracture velocity

Acknowledgments

이 논문은 조선대학교 학술연구비의 지원을 받아 연구되었음(2019).

References

  • Ashby, M. F., 2017, Material Selection in Mechanical Design Fifth Edition, Butterworth-Heinemann, Cambridge, MA, USA.
  • Callister, W. D. Jr., Rethwisch, D. G., 2014, Material Science and Engineering An Introduction 9th edition, Wiley, Hoboken, NJ, USA.
  • Kim, T. W., 2021, Reliability Validation of Impact Test Results for Polymer Composite, J. Korean Soc. Manuf. Technol. Eng., 30:1 80-84. [https://doi.org/10.7735/ksmte.2021.30.1.80]
  • Kang, H. S., Kim, C. H., Cho, Y. T., 2018, Quantitative Evaluation Method of Material Defects in Component Parts Using Infrared Thermal Imaging, J. Korean Soc. Manuf. Technol. Eng., 27:6 557-563. [https://doi.org/10.7735/ksmte.2018.27.6.557]
  • Ro, C. S., Kim, K. S., Chang, H. S., 2014, Method for Measuring Weld Temperature Using an Infrared Thermal Imaging Camera, J. Korean Soc. Nondestruc. Test., 34:4 299-304. [https://doi.org/10.7779/JKSNT.2014.34.4.299]
  • Yun, S. H. Park, J. H., Lee, G. I., Wang, L., Choi, N. S., 2020, Prediction of Fatigue Limit in Al6061 Under Various Stress Ratios of Loading Mode Using Infrared Thermography, Trans. Korean Soc. Mech. Eng. A, 44:7 471-479. [https://doi.org/10.3795/KSME-A.2020.44.7.471]
  • Chung, Y. C., Kim, W. T., Choi, W. J., 2015, Measurement Uncertainty on Subsurface Defects Detection Using Active Infrared Thermographic Technique, J. Korean Soc. Nondestruc. Test., 35:5 341-348. [https://doi.org/10.7779/JKSNT.2015.35.5.341]
  • Lee, S. J., Chung, Y. J., Kim, W. T., 2019, Thermal Characteristics on HS540 Tensile Specimen Crack using Ultrasonic Infrared Thermography, J. Korean Soc. Nondestruc. Test., 39:4 197-202. [https://doi.org/10.7779/JKSNT.2019.39.4.197]
  • Kim, J. G., 2018, Fracture Mode Characterization of Polymer Matrix Composites Using Nondestructive Evaluation Techniques, J. Korean Soc. Nondestruc. Test., 38:6 388-393. [https://doi.org/10.7779/JKSNT.2018.38.6.388]
  • Kim, J. W., Lee, D. G., 2007, Effect of Fiber Orientation and Fiber Contents on the Tensile Strength in Fiber-reinforced Thermoplastic Composites, Compos. Res., 20:5 13-19.
  • Kim, E. J., Lee, G. I., Kim, J. Y., 2020, A Performance Evaluation of a Heat Dissipation Design for a Lithium-Ion Energy Storage System Using Infrared Thermal Imaging, J. Korean Soc. Manuf. Process. Eng., 19:5 105-110. [https://doi.org/10.14775/ksmpe.2020.19.05.105]
Jin-Woo Kim

Professor in the Department of Mechanical Engineering, Chosun University. His research interest is Mechanics, design, and materials.

E-mail: jinu763@chosun.ac.kr