한국생산제조학회 학술지 영문 홈페이지
[ Best Paper of This Month ]
Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 31, No. 1, pp.1-11
ISSN: 2508-5107 (Online)
Print publication date 15 Feb 2022
Received 17 Dec 2021 Revised 04 Jan 2022 Accepted 06 Jan 2022
DOI: https://doi.org/10.7735/ksmte.2022.31.1.1

DFF와 압흔 경계 구분을 이용한 수직 압흔 변위 측정 방법에 관한 연구

이승원a ; 유경현a ; 이철수b, *
A Study on the Measurement Method of Vertical Imprint Displacement Using a Depth from Focus (DFF) Method and the Separation of Imprint Boundaries
Seung Won Leea ; Kyung Hyun Yooa ; Cheol Soo Leeb, *
aDepartment of Mechanical Engineering, Graduate School, Sogang University
bDepartment of Mechanical Engineering, Sogang University

Correspondence to: *Tel.: +82-2-705-8646 E-mail address: cscam@sogang.ac.kr (Cheol Soo Lee).

Abstract

Measuring imprint is important to evaluate material’s mechanical property through indentation test. In this study, we propose a measurement method for vertical imprint displacement after an indentation test. we divided the imprint into two regions, a file-up region with small displacement and a sloped region with large displacement. We estimated the focus value with different sized Laplacian operators for the separated regions. Then, we combined these results and estimated the depth map using the depth from focus (DFF) method. We constructed the median line of the depth map from the center of the imprint and compared results to contact profiler data. Comparing the results for the three materials (Al 1050 - T6, Al 5052 - H32, Al 6061 - T651), the maximum error rate was found to be 5%. In future studies, this result can be used for the estimation of material properties using FEM data.

Keywords:

Indentation test, Depth from focus (DFF), Focus value, Imprint, Micro scale

References

  • Zhou, L., Yao, Y., 2007, Single Crystal Bulk Material Micro/Nano Indentation Hardness Testing by Nanoindentation Instrument and AFM, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 460-461 95-100. [https://doi.org/10.1016/j.msea.2007.01.029]
  • Lee, S. P., Lee, I. H., Park, J. S., Hwang, S. H., Park, J. Y., 2010, Deformation Analysis for Dust Cap of Wheel Bearing, Proc. 2010 Korean Soc. Manuf. Technol. Eng. Spring Conf., 60.
  • Park, J. H., Kim, J. S., Kim, P. H., Lee, K. H., Song, Y. S., 2010, Evaluation of Mechanical Characteristics of Plasma Spray Coating Layer using Indentation Test Method, Proc. 2010 Korean Soc. Manuf. Technol. Eng. Autumn Conf., 131-132.
  • Kim, M. K., 2021, Prediction of Mechanical Properties using Micro Indentation and Digital Image Correlation, Master Thesis, Sogang University, Republic of Korea.
  • Lee, H. Y., Lee, J. H., 2008, Evaluation of Material Characteristics by Micro/nano Indentation Tests, Trans. Korean Soc. Mech. Eng. A, 32:10 805-816. [https://doi.org/10.3795/KSME-A.2008.32.10.805]
  • Kwon, D. I., Lee, K. W., Kim, S. H., Kim, J. Y., Lee, Y. H., 2005, The Measurement of Nano Properties using Nanoindentation, Proc. 2005 Korean Soc. Precis. Eng. Autumn Conf., 63-68.
  • Yang, J. -Y., Yoon, M. -C., 2012, Indented Surface Configuration and its Volume Calculation, J. Korean Soc. Manuf. Technol. Eng., 21:5 708-713. [https://doi.org/10.7735/ksmte.2012.21.5.708]
  • Bolzon, G., Maier, G., Panico, M., 2004, Material Model Calibration by Indentation, Imprint Mapping and Inverse Analysis, Int. J. Solids Struct., 41:11-12. 2957-2975. [https://doi.org/10.1016/j.ijsolstr.2004.01.025]
  • Meng, L., Breitkopf, P., Raghavan, B., Mauvoisin, G., Bartier, O., Hernot, X., 2015, Identification of Material Properties using Indentation Test and Shape Manifold Learning Approach, Comput. Meth. Appl. Mech. Eng., 297 239-257. [https://doi.org/10.1016/j.cma.2015.09.004]
  • Kim, G. -B., Shin, Y. -S., 2005, A Measurement Method of Three-Dimensional Surface Morphology Based on Depth-from-Focus through Linear Magnification Calibration, J. Korean Soc. Precis. Eng., 22:9 115-122.
  • Ko, K. W., Kim, D. H., Kim, M. Y., Kim J. H., 2009, An Automatic Optical Inspection System for Inspection of CMOS Compact Camera Module Assembly, Int. J. Precis. Eng. Manuf., 10:5 67-72. [https://doi.org/10.1007/s12541-009-0095-z]
  • Kim, G. -B., Shin, Y. -S., Moon, S. -H., 2006, A Laser-Applied Hybrid Focus Method for the Measurement of a Surface Morphology with Depth Discontinuity, J. Korean Soc. Precis. Eng., 23:9 111-118.
  • Shin, Y. S., Kim, G. B., 2004, A Measurement Method of Surface Morphology Based on Depth-from-Focus with Magnification Variations of Optical System, Proc. 2004 Korean Soc. Precis. Eng. Autumn Conf., 1500-1503.
  • Vidakis, N., Antoniadis., A., Bilalis, N., 2003, The VDI 3198 Indentation Test Evaluation of a Reliable Qualitative Control for Layered Compounds, J. Mater. Process. Technol., 143-144 481-485. [https://doi.org/10.1016/S0924-0136(03)00300-5]
  • Oh, S. K., Yang, K. S., Kim, S. J., Jung, K. O., Kim, D. H., 2010, A Study of Autofocusing in the Scanning Electron Microscopy, Proc. 2010 Korean Soc. Manuf. Technol. Eng. Spring Conf., 128-128.
  • Shin, R., Choi, W., Kang, S., 2016, Development of a Confocal Imaging System using an Objective Microlens Array with an Increased Working Distance, Proc. 2016 Korean Soc. Manuf. Technol. Eng. Autumn Conf., 21-21.
  • Moeller, M., Benning, M., Schönlieb, C., Cremers, D., 2015, Variational Depth from Focus Reconstruction, IEEE Trans. Image Process., 24:12 5369-5378. [https://doi.org/10.1109/TIP.2015.2479469]
  • Pertuz, S., Puig, D., Garcia, M. A., 2013, Analysis of Focus Measure Operators for Shape-from-focus, Pattern Recognition, 46:5 1415-1432. [https://doi.org/10.1016/j.patcog.2012.11.011]
  • Shi, Y., Wei, Y., Yao, H., Pan, D., Xiao, G., 2018, High-boost-based Multiscale Local Contrast Measure for Infrared Small Target Detection, IEEE Geosci. Remote Sens. Lett., 15:1 33-37. [https://doi.org/10.1109/LGRS.2017.2772030]
  • Tseng, C., Wang, S., 2014, Shape-From-Focus Depth Reconstruction With a Spatial Consistency Model, IEEE Trans. Circuits Syst. Video Technol., 24:12 2063-2076. [https://doi.org/10.1109/TCSVT.2014.2358873]
  • Kim, G. B., Kim, S. C., 2005, An Accurate Surface Measurement Method based on Depth-from-focus Considering Magnification Variations, Proceedings of the 20th Annual Meeting of the American Society for Precision Engineering, 20.
  • Wang, M., Wu, J., Hui, Y., Zhang, Z., Zhan, X., Guo, R., 2017, Identification of Elastic-plastic Properties of Metal Materials by using the Residual Imprint of Spherical Indentation, Mater. Sci. Eng. A-Struct. Mater. Prop. Microstruct. Process., 679 143-154. [https://doi.org/10.1016/j.msea.2016.10.025]
  • Hwang, Y., Marimuthu, K. P., Kim, N., Lee, C., Lee, H., 2021, Extracting Plastic Properties from in-plane Displacement Data of Spherical Indentation Imprint, Int. J. Mech. Sci., 197 106291. [https://doi.org/10.1016/j.ijmecsci.2021.106291]
  • Kim, Y. J., Song, T. K., Park, J. -H., Hahn, J. -H., 2006, A Method to Estimate Tensile Properties using Combined Nano-Indentation Tests and Finite Element Simulations, Proc. 2006 Korean Soc. Precis. Eng. Spring Conf., 503-504.
Seung Won Lee

Master course in the Department of Mechanical Engineering, Sogang University. His research interest is Robotics.

E-mail: seungwon426@naver.com

Kyung Hyun Yoo

Master course in the Department of Mechanical Engineering, Sogang University. His research interest is mechanical design.

E-mail: bggh3@naver.com

Cheol Soo Lee

Professor in the Department of Mechanical Engineering, Sogang University. His research interest is Machine, Design of Machine Tools.

E-mail: cscam@sogang.ac.kr