한국생산제조학회 학술지 영문 홈페이지
[ Technical Papers ]
Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 32, No. 4, pp.235-241
ISSN: 2508-5107 (Online)
Print publication date 15 Aug 2023
Received 08 Jun 2023 Revised 28 Jul 2023 Accepted 04 Aug 2023
DOI: https://doi.org/10.7735/ksmte.2023.32.4.235

미립자 금속 촉매 방식 배기가스 후처리장치 재제조 공정 연구

유성주a ; 송현석a, * ; 문정진a ; 김형준b ; 강정호c ; 김훈명c
Investigation of the Remanufacturing Process of Particulate Metal Catalyst-type Diesel Filters
Seong Ju Yooa ; Hyun Suk Songa, * ; Jeong Jin Moona ; Hyong Jun Kimb ; Jung Ho Kangc ; Hoon Myung Kimc
aReliability Technology R&D Department, Korea Automotive Technology Institute
bR&D Department, Dongah ENC
cAlternative Fuel Power System R&D Department, Korea Automotive Technology Institute

Correspondence to: *Tel.: +82-41-559-3145 E-mail address: songhs@katech.re.kr (Hyun Suk Song).

Abstract

Developing an efficient remanufacturing process that mitigates severe failure in particulate metal catalysts (PMCs) is necessary to reduce environmental pollution (e.g., CO2 emission) and manufacturing costs. In this study, a PMC remanufacturing process was developed by classifying the failures exhibited by a used PMC into four levels, followed by determining the feasibility of remanufacturing the PMC. The developed remanufacturing process consisted 11 steps according to the failure levels of the used PMC. The performance of a new PMC and that of the PMC remanufactured by our proposed method were evaluated and compared. PMC remanufacturing is an eco-friendly technology that involves less production steps, reduces raw-material consumption, reduces environmental pollution, and aids in resource saving.

Keywords:

Remanufacturing, PMC, PM, Process

Acknowledgments

본 연구는 한국에너지기술평가원(KETEP)의 지원을 받아 수행한 연구 과제입니다. (No. 20206410100080)

References

  • Hyundai Motors, 2023, viewed 26 July 2023, Truck Porter2 EV Price, <https://www.hyundai.com/kr/ko/e/vehicles/porter2-electric/price, >.
  • Hyundai Motors, 2023, viewed 26 July 2023, Truck Porter2 Price, <https://www.hyundai.com/kr/ko/e/vehicles/porter2/price, >.
  • Seoulsolution, 2017, viewed 26 July 2023, Diesel vehicle exhaust reduction device, <https://www.seoulsolution.kr/ko/node/6538, >.
  • Kim, C. H., Kim, H. C., Lee, H. K., Choi, J. H., 2009, A Study on PM Reduction Performansce Evaluation of Metal DPF for Disel Engine, KSAE 2009 Annual Conference, 905-910.
  • Ryu, K. H., Park, J. K., 2018, A Study on the Development of an Aftertreatment System for PM/NOx Reduction in Diesel Engines, J. Power Syst. Eng., 22:4 47-54. [https://doi.org/10.9726/kspse.2018.22.4.047]
  • Yeom, G. I., Han, D. B., Nam, S. H., Baek, Y. S., 2018, A CFD Analysis on DPF for the Removal of PM from the Emission of Diesel Vehicle, Clean Technol., 24:4 301-306. [https://doi.org/10.7464/ksct.2018.24.4.301]
  • Koo, B. S., Kong, J. D., Oh, K. C., Lee, C. B., 2013, PM Sensor for Diesel Vehicle DPF Judgment of the Electrochemical Defects using the Solid Electrolyte and the Metal Oxide Electrode, KSAE 2013 Annual Spring Conference, 484-489.
  • Choi, K. Y., Park, H. K., 2010, A Study on the Effectiveness of Remanufacturing Technology for the Catalyzed Diesel Particulate Filter-trap(DPF) Deactivated by Diesel Exhaust Gas, Journal of Korean Society of Environmental Engineers, 32:10 957-964.
  • Ko, K. H., Bea, Y. J., Moon, J. Y., Kang, H. Y., Hwang, Y. W., 2019, An Economic Effect Analysis on Remanufacturing Part of Automobile, Resources Recycling, 28:4 37-43. [https://doi.org/10.7844/kirr.2019.28.4.37]
  • National Legal Information Center, 2022, viewed 26 July 2023, Execution of law The Law Promoting the Transition to an Environmentally Friendly Industrial Structure, <https://www.law.go.kr/lsInfoP.do?lsiSeq=236299&lsId=000323&chrClsCd=010202&urlMode=lsInfoP&viewCls=lsInfoP&efYd=20220420&vSct=&ancYnChk=0#0000, >.
  • Yun, D. K., Lee, H. T., Nam, I. W., Kim, Y. H., Yun, J. G., 2019, Case Study of Ignited Vehicle Fire in Exhaust System, KSAE 2019 Annual Autumm Conference & Exhibition, 1289-1293.
  • Song, J. Y., Sa, S. H., Nam, J. W., Cho, Y. J., Kim, J. P., Park, N. K., 2012, Analysis on Vehicle Fires Caused by Damage of Diesel Particulate Filter (DPF), Fire Sci. Eng., 26:4 70-76. [https://doi.org/10.7731/KIFSE.2012.26.4.070]
Seong Ju Yoo

Researcher in the Reliability Technology R&D Department, Korea Automotive Technology Institute. His research interests are Certification Exams and Remanufacturing.

E-mail: sjyoo@katech.re.kr

Hyun Suk Song

Principal Researcher in the Reliability Technology R&D Department, Korea Automotive Technology Institute. His research interest is Component Life Analysis.

E-mail: songhs@katech.re.kr

Jeong Jin Moon

Researcher in the Reliability Technology R&D Department, Korea Automotive Technology Institute. His research interests are "PHM, Equipment Testing".

E-mail: jjmoon@katech.re.kr

Hyong Jun Kim

CEO in the R&D Department, Dongah ENC. His research interests are Exhaust Gas after Treatment System and DPF Cleaning.

E-mail: kimhj@dong-ah.co.kr

Jung Ho Kang

Chief Researcher in the Alternative Fuel Power System R&D Department, Korea Automotive Technology Institute. His research interest is Research and Certification Evaluation of ON/OFF-road Environment Improvement Technology Development.

E-mail: jhkang@katech.re.kr

Hoon Myung Kim

Senior Researcher in the Alternative Fuel Power System R&D Department, Korea Automotive Technology Institute. His research interest is Evaluation of the Applicability of Engine Post-processing(exhaust) Technology.

E-mail: kimhm@katech.re.kr