CAE를 이용한 초음파 나이프 트랜스듀서 설계
Abstract
This study aimed to design and verify ultrasonic knife modules, which have experienced a recent surge in demand. To this end, ultrasonic transducers and horns with longitudinal vibration characteristics of 40 kHz grounded in theoretical equations were designed. Subsequently, tensile experiments on materials were conducted and applied for precise wavelength analysis. Modal and harmonic response analysis using CAE was performed to predict vibration characteristics and natural frequencies for the designed ultrasonic knife. As a result of the analysis, the study revealed that the knife had an intrinsic frequency characteristic of about 38.1 kHz and vibrated in the axial direction. An ultrasonic knife, stemming from these findings, was manufactured and confirmed to achieve equivalent performance to the design, through resonance frequency analysis and vibration mode analysis.
Keywords:
Ultrasonic, Transducer design, CAE, CuttingReferences
- Jordan, T., L., Ounaies, Z., 2001, Piezoelectric Ceramics Characterization, NASA/CR-2001-211225 ICASE Report, <https://webharvest.gov/peth04/20041102031020/http://techreports.larc.nasa.gov/icase/2001/icase-2001-28.pdf, >.
-
Churi, N. J., Pei, Z. J., Treadwell, C., 2006, Rotary Ultrasonic Machining of Titanium Alloy: Effects of Machining Variables, Mach. Sci. Technol., 10:3 301-321.
[https://doi.org/10.1080/10910340600902124]
-
Geng, D., Zhang, D., Xu, Y., He, F., Liu, D., Duan, Z., 2015, Rotary Ultrasonic Elliptical Machining for Side Milling of CFRP: Tool Performance and Surface Integrity, Ultrasonics, 59 128-137.
[https://doi.org/10.1016/j.ultras.2015.02.006]
-
Liu, D., Cong, W. L., Pei, Z. J., Tang, Y., 2012, A Cutting Force Model for Rotary Ultrasonic Machining of Brittle Materials, Int. J. Mach. Tools Manuf., 52:1 77-84.
[https://doi.org/10.1016/j.ijmachtools.2011.09.006]
-
Wang, Y., Lin, B., Cao, X., Wang, S., 2014, An Experimental Investigation of System Matching in Ultrasonic Vibration Assisted Grinding for Titanium, J. Mater. Process. Technol., 214:9 1871-1878.
[https://doi.org/10.1016/j.jmatprotec.2014.04.001]
-
Sanda, A., Arriola, I., Navas, V. G., Bengoetxea, I., Gonzalo, O., 2016, Ultrasonically Assisted Drilling of Carbon Fibre Reinforced Plastics and Ti6Al4V, J. Manuf. Process., 22 169-176.
[https://doi.org/10.1016/j.jmapro.2016.03.003]
-
Maeng, H. M., Choi, H. B., Lim, D. W., Park, C. I., Kang, D. S., 2021, Optimization Experiment of Burr Height by Ultrasonic Cutting Machining, J. Korean Soc. Manuf. Technol. Eng., 30:4 332-337.
[https://doi.org/10.7735/ksmte.2021.30.4.332]
- Stanasel, I., Ardelean, F., 2010, The Parametric Design of the Ultrasonic Exponential Horns, Nonconventional Technologies Review, 14:4 54-58.
- Al-Budairi, H. D., 2012, Design and Analysis of Ultrasonic Horns Operating in Longitudinal and Torsional Vibration, Doctorate Thesis, University of Glasgow, The United Kingdom.
Professor in the Department of Mold Design, Korea Polytechnics. His research interest is Manufacturing System.
E-mail: khsong@kopo.ac.kr
Ph.D. Student in the Department of Mechanical Engineering, Inha University. Her research interest is CAD/CAM and Optimization.
E-mail: roal8888@gmail.com
Ph.D. Student in the Department of Mechanical Engineering, Inha University. His research interest is Manufacturing System.
E-mail: ssm225@kopo.ac.kr
Ph.D. Student in the Department of Metals and Materials Process Engineering, Inha University. Her research interest is Injection Mold.
E-mail: yoohwa9k@kopo.ac.kr