9 mm SPR을 사용한 알루미늄 이종소재 3중 접합에 대한 십자인장 시험모사를 통한 강도 예측모델 연구

Acknowledgments

이 연구은 2021년 정부(중소벤처기업부)의 재원으로 중소기업기술정보진흥원의 지원과 2023년도 정부(산업통상자원부)의 재원으로 한국산업기술진흥원의 지원을 받아 수행되었으며, 이에 관계자 여러분께 감사드립니다. (S3073212, 2021 년 중소기업기술혁신개발사업), (P0008425, 2023년 산업혁신인재성장지원사업)

References

• Kim, S. H., Bae, G., Song, J. H., Park, K. Y., Park, N., 2020, Influence of the Flow Stress of the Rivet on the Numerical Prediction of the Self-Piercing Rivet (SPR) Joining, Transactions of Materials Processing, 29:5 257-264. [https://doi.org/10.5228/KSTP.2020.29.5.257]
• Tisza, M., 2014, Advanced Materials in Sheet Metal Forming, Key Engineering Materials, 581 137-142. [https://doi.org/10.4028/www.scientific.net/KEM.581.137]
• Manladan, S. M., Yusof, F., Ramesh, S., Fadzil, M., Luo, Z., Ao, S., 2017, A Review on Resistance Spot Welding of Aluminum Alloys, Int. J. Adv. Manuf. Technol., 90 605-634. [https://doi.org/10.1007/s00170-016-9225-9]
• Kang, Y. S., Park, J. H., Jeon, Y. H., Hong, M. S., 2018, Study on the 3-layer Joining of Aluminum Alloy and Steel Plate Using Self-piercing Riveting, J. Korean Soc. Manuf. Technol. Eng., 27:4 307-316. [https://doi.org/10.7735/ksmte.2018.27.4.307]
• KS, 2021, Resistance Welding — Destructive Testing of Welds — Specimen Dimensions and Procedure for Cross Tension Testing of Resistance Spot and Embossed Projection Welds, KS B ISO14272, Korean Standard Association (KSA), South Korea.
• KS, 2021, Resistance welding — Destructive Testing of Welds — Specimen Dimensions and Procedure for Tensile Shear Testing Resistance Spot and Embossed Projection Welds, KS B ISO14273, Korean Standard Association (KSA), South Korea.
• Lin, J., Qi, C., Wan, H., Min, J., Chen, J., Zhang, K., Zhang, L., 2021, Prediction of Cross-tension Strength of Self-piercing Riveted Joints Using Finite Element Simulation and XGBoost Algorithm, Chin. J. Mech. Eng., 34 1-11. [https://doi.org/10.1186/s10033-021-00551-w]
• Haque, R., Durandet, Y., 2016, Strength Prediction of Self-pierce Riveted Joint in Cross-tension and Lap-shear, Mater. Des., 108 666-678. [https://doi.org/10.1016/j.matdes.2016.07.029]
• Kim, C., Min, K. M., Choi, H., Kim, H. J., Lee, M. G., 2018, Development of Analytical Strength Estimator for Self-piercing Rivet Joints through Observation of Finite Element Simulations, Int. J. Mech. Sci., 202-203 106499. [https://doi.org/10.1016/j.ijmecsci.2021.106499]
• Jeong, C. H., Kim, D. Y., Oh, H. S., Cheon, S. S., 2018, FE Analysis of Self-Piercing Rivet (SPR) Process and Tensile Behaviours, J. Korean Soc. Precis. Eng., 35:9 875-880. [https://doi.org/10.7736/KSPE.2018.35.9.875]
• Wang, B., Hao, C., Zhang, J., Zhang, H., 2006, A New Self-piercing Riveting Process and Strength Evaluation, J. Manuf. Sci. Eng., 128:2 580-587. [https://doi.org/10.1115/1.2137746]
• Abe, Y., Maeda, T., Yoshioka, D., Mori, K. I., 2020, Mechanical Clinching and Self-pierce Riveting of Thin Three Sheets of 5000 Series Aluminium Alloy and 980 MPa Grade Cold Rolled Ultra-high Strength Steel, Materials, 13:21 4741. [https://doi.org/10.3390/ma13214741]
• Mori, K., Abe, Y., Kato, T., 2014, Self-pierce Riveting of Multiple Steel and Aluminium Alloy Sheets, J. Mater. Process. Technol., 214:10 2002-2008. [https://doi.org/10.1016/j.jmatprotec.2013.09.007]
• Ludwik, P., 1909, Einfluß der Deformationsgeschwindigkeit mit besonderer Berücksichtigung der Nachwirkungserscheinungen, Elemente der Technologischen Mechanik, 44-53. [https://doi.org/10.1007/978-3-662-40293-1_4]
• Andersson, D., Saliba, F., 2020, Virtual Testing of Self-piercing Rivet Connections, Master Thesis, Luleå University, Kingdom of Sweden.
• Wang, D., Kong, D., Xie, C., Li, S., Zong, L., 2022, Study on the Effect of Rivet die Parameters on Joint Quality of Self-piercing Riveting Employed 3D Modeling and MCDM Method, Int. J. Adv. Manuf. Technol., 119 8227-8241. [https://doi.org/10.1007/s00170-022-08759-3]
• Carandente, M., Dashwood, R. J., Masters, I. G., Han, L., 2016, Improvements in Numerical Simulation of the SPR Process using a Thermo-mechanical Finite Element Analysis, J. Mater. Process. Technol., 236 148-161. [https://doi.org/10.1016/j.jmatprotec.2016.05.001]
• Hoang, N. H., Hopperstad, O. S., Langseth, M., Westermann, I., 2013, Failure of Aluminium Self-piercing Rivets: An Experimental and Numerical Study, Mater. Des., 49 323-335. [https://doi.org/10.1016/j.matdes.2013.01.034]
• Mucha, J., 2011, A Study of Quality Parameters and Behaviour of Self-piercing Riveted Aluminium Sheets with Different Joining Conditions, Strojniški vestnik-Journal of Mechanical Engineering, 57:4 323-333. [https://doi.org/10.5545/sv-jme.2009.043]
• Jang, H. S., Yun, S. M., Park, H. S., Lee, D. G., Kim, S. Y., 2023, A Study on the Riveting Behavior of Self-piercing Rivets in 3 Aluminum Alloy Plates using FEM, Proc. Korean Soc. Manuf. Technol. Eng. Spring Conf., 127.