한국생산제조학회 학술지 영문 홈페이지

Current Issue

Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 29 , No. 2

[ Papers ]
Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 29, No. 1, pp.35-41
Abbreviation: J. Korean Soc. Manuf. Technol. Eng.
ISSN: 2508-5107 (Online)
Print publication date 15 Feb 2020
Received 21 Nov 2019 Revised 18 Dec 2019 Accepted 30 Dec 2019
DOI: https://doi.org/10.7735/ksmte.2020.29.1.35

우주과학 탑재체(ISSS) 궤도 열해석
안진효a ; 조희근b, *

On-orbit Thermal Analysis of the Instrument for the Study of Space Storm
Jin Hyo Ana ; Hee Keun Chob, *
aDepartment of Precision Mechanical Engineering, Andong National University
bDepartment of Mechanical Engineering Education, Andong National University
Correspondence to : *Tel.: +82-54-820-5677 E-mail address: hkcho@anu.ac.kr (Hee Keun Cho).


Abstract

In this study, we performed an on-orbit thermal analysis of the Instrument for the Study of Space Storm (ISSS), loaded on NEXTSat-1. ISSS is a major payload of NEXTSat-1, which was launched on December 4, 2018, weighs 13 kg, and has an aluminum frame structure. By varying the base plate temperature and upper shielding material, we analyzed the high energy particle detector temperature change for forty thousand seconds. As a result, the payload became thermally stable after the 2nd orbit cycle of the satellite from initial conditions; the analysis describes the effects of multi-layer insulation and Teflon_VDA, which are upper shielding materials used for thermal control of payloads.


Keywords: Thermal analysis, NEXSat-1, ISSS, HEPD (High Energy Particle Detector)

References
1. Cho, H. G., 2015, Dynamic Response Assessment of Space Use Telescope, Journal of the Korean Society of Manufacturing Technology Engineers, 24:1 87-93, http://dx.doi.org/10.7735/ ksmte.2015.24.1.087.
2. Kwak, D. H., Jung, H. Y., Lee, J. E., Kang, K. H., 2017, Material Analysis and Shape Optimization of a Deployable Lightweight Satellite Antenna Reflector, Journal of the Korean Society of Manufacturing Technology Engineers, 26:2 185-192.
3. Jang, J. I., Park, S. H., 2019, Structural Design and Analysis of Nanosatellite for Microgravity Scientific Missions, Journal of the Korean Society of Manufacturing Technology Engineers, 28:2 93-99.
4. Kim, H. I., Cho, H. G., Min, K. W., Son, J. D., Shin, K. H., Chae, J. S., 2015, Modal Analysis of Space Science Instrument (ISSS) for Next Generation Small Satellite-1, KSAS Fall Conference, 934-937.
5. Satellite Technology Research Center, n.d., viewed 8 Aug. 2017, NEXTSat-1, <http://satrec.kaist.ac.kr/03_08.php>.
6. Park, D. I., Kikuko, M., Hosei, N., 2017, Thermal Design and Validation of Radiation Detector for the ChubuSat-2 Micro-satellite with high-thermal-conductive Graphite Sheets, Acta Astronautica, 136 387-394, http://dx.doi.org/10.1016/j. actaastro.2017.03.030.
7. Lee, J. Y., Huh, H. I., Kim, S. H., Chang, S. Y., Lee, D. G., Lee, S. H., Choi, H. J., 2011, Preliminary Thermal Analysis for LEO Satellite Optical Payload’s Thermal Vacuum Test, Journal of The Korean Society for Aeronautical and Space Sciences, 39:5 466-473, http://dx.doi.org/10.5139/JKSAS.2011.39.5.466.
8. Jeon, W. J., Kim, S. H., Hyeon, B. S., Jeon, H. Y., Han, S. C., Han, K. A., Yu, J. H., 2016, Preliminary Thermal Analysis of Compact LEO Satellite, KSAS Fall Conference, 1010-1011.
9. Kang, S. J., Ha, H. W., Oh, H. U., 2014, On-orbit Thermal Analysis of Pico-class Satellite STEP Cube Lab. for Verification of Fundamental Space Technology, Journal of The Korean Society for Aeronautical and Space Sciences, 42:9 795-801, http://dx.doi.org/10.5139/JKSAS.2014.42.9.795.
10. Incropera, F. P., Dewitt, D. P., Bergman, T. L., Lavine, A. S., 2016, Principles of Heat and Mass Transfer, Wiley, New York.
11. Bathe, K. J., 1996, Finite Element Procedures, Prentice Hall, New Jersey.

Jin Hyo An

Ph.D. candidate in the Department of Precision Mechanical Engineering, Andong National University.His research interest is FEM.

E-mail: malong8484@naver.com

Hee Keun Cho

Associate professor in the Department of Mechanical Engineering Education, Andong National University.His research interest are FEM and composite materials.

E-mail: hkcho@anu.ac.kr