한국생산제조학회 학술지 영문 홈페이지

Current Issue

Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 29 , No. 4

[ Papers ]
Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 29, No. 4, pp.274-280
Abbreviation: J. Korean Soc. Manuf. Technol. Eng.
ISSN: 2508-5107 (Online)
Print publication date 15 Aug 2020
Received 05 May 2020 Revised 28 Jun 2020 Accepted 03 Jul 2020
DOI: https://doi.org/10.7735/ksmte.2020.29.4.274

Heat Shields Fused with Embossed and Press Formed Al Alloy Sheets for Automobiles
Dong Hwan Parka ; Hyuk Hong Kwonb, * ; Jun Hyuk Seoc
aMaterials Performance Evaluation Department, Gyeongbuk Hybrid Technology Institute
bDepartment of Mechanical Engineering, Daejin University
cProduction and Logistics Department, Youngjin Co., Ltd

Correspondence to : *Tel.: +82-31-539-1972 E-mail address: hhkwon@daejin.ac.kr


Abstract

Heat shields are used on most engines to protect components and bodywork from heat damage. With regular driving conditions, heat shields need to protect parts from nearby heat sources with surface temperatures up to 650°C. Aluminum heat shields are able to protect against quite high temperatures. Aluminized steel sheets are required for heat shielding in the highest temperature range. Lightweight materials such as aluminum alloys are used to realize low fuel consumption for automobiles. The influence of embossing for heat shield parts in the press forming of Al alloy sheet after embossing was examined. This paper is to develop heat shield parts using aluminum alloy sheet for automobiles to improve the formability and reduce the wrinkling.


Keywords: Heat shield, Automobile, Embossing, Press forming, Al alloy sheet

References
1. Kumar, S. D., Amjith, T. R., Anjaneyulu, C., 2016, Forming Limit Diagram Generation of Aluminum Alloy AA2014 Using Nakazima Test Simulation Tool, Procedia Technology, 24 386-393.
2. Ko, S. J., Kim, T. J., Kim, I. S., 2011, Forming Condition for Automotive Body Outer Panel using Aluminum Alloy Sheet for Improved Dent Resistance, Transactions of Materials Processing, 20:6 420-426.
3. Kim, K. J., Nguyen, N. T., Kim, D. Y., Kim, H. Y., 2011, Application of Failure Criteria in Aluminum Sheet Forming Analysis, Transactions of Materials Processing, 20:2 167-171.
4. Choi, J. M., Kim, J. H., 2015, Dimensional Accuracy of Cylindrical Cups in Multi-Stage Drawing of Aluminum Sheet Metal, Transactions of Materials Processing, 24:2 115-120.
5. Kil, M. G., Yoon, J. S., Park, J. W., Kang, B. S., 2017, Comparative Study of Applicability of Aluminum, Magnesium and Copper Alloy Sheets using Flexibly-reconfigurable Roll Forming, Transactions of Materials Processing, 26:3 168-173.
6. Kim, J. G., Kim, J. B., Kim, J. H., 2014, The Influence of Process Parameters in Piercing with a High Aspect Ratio for Thick Aluminum Sheet, Transactions of Materials Processing, 23:1 23-28.
7. Kim, T. H., Kang, M. S., Jin, I. T., 2015, Electric Resistance Heated Friction Stir Spot Welding of Overlapped Al5052 Alloy Sheets, Transactions of Materials Processing, 24:4 256-263.
8. Park, D. H., Kim, T. J., 2015, A Study on Al Hot Forming using Air Bulging, Transactions of Materials Processing, 24:1 20-27.
9. Kim, H. Y., Choi, S. C., Lee, H. S., Kim, H. J., Lee, K. T., 2007, Experiments for Forming Limit Diagram and Springback Characteristics of AZ31B Magnesium Alloy Sheet at Elevated Temperature, Transactions of Materials Processing, 16:5 364-369.
10. Park, D. H., Yun, J. J., Tak, Y. H., Lee, C. W., 2015, Development of Automotive Dash Panel Parts using Warm Drawing of Magnesium Alloy AZ31B, Transactions of Materials Processing, 24:4 248-255.
11. Park, D. H., Tak, Y. H., 2014, A Study on Warm Forming Technology of Car Body Reinforced Dash using Magnesium Alloy Sheet, Journal of the Korean Society of Manufacturing Technology Engineers, 23:5 519-524.

Dong Hwan Park

Head researcher in the Materials Performance Evaluation Department, Gyeongbuk Hybrid Technology Institute.His research interests are sheet metal forming, hot and cold complex forging for automobile Parts.

E-mail: pdh@ghi.re.kr

Hyuk Hong Kwon

Professor in the Department of Mechanical Engineering, Daejin University.His research interests are metal forming, die design for automobile parts, and intellectual property.

E-mail: hhkwon@daejin.ac.kr

Jun Hyuk Seo

Director in the Production and Logistics Department, Youngjin Co., Ltd.His research interest is complex forming for automobile parts.

E-mail: sjh75@yjmotor.co.kr