Home | Browse Archives | About | For Contributors |
Sorry.
You are not permitted to access the full text of articles.
If you have any questions about permissions,
please contact the Society.
죄송합니다.
회원님은 논문 이용 권한이 없습니다.
권한 관련 문의는 학회로 부탁 드립니다.
[ Papers ] | |
Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 29, No. 5, pp. 353-360 | |
Abbreviation: J. Korean Soc. Manuf. Technol. Eng. | |
ISSN: 2508-5107 (Online) | |
Print publication date 15 Oct 2020 | |
Received 26 Jun 2020 Revised 06 Aug 2020 Accepted 18 Aug 2020 | |
DOI: https://doi.org/10.7735/ksmte.2020.29.5.353 | |
Finite Element Analysis and Fabrication of an Ultrasonic Milling System | |
aEnergy Systems Research Division, Korea Institute of Machinery and Materials | |
Correspondence to : *Tel.: +82-42-868-7967 E-mail address: hkim@kimm.re.kr (Hyunse Kim). | |
Funding Information ▼ |
Ultrasound has been adapted in several industrial and manufacturing applications. In this study, an ultrasonic milling system, which can vibrate a rotating tool, was designed and fabricated. Firstly, a lead zirconate titanate (PZT) was designed using finite element analysis, and the obtained peak impedance value of 47.2 kHz agreed well with the fabricated PZT value of 48.0 kHz. Additionally, an aluminum waveguide with two PZT actuators was analyzed, whose impedance characteristic was predicted to be 43.8 kHz. Consequently, a milling waveguide was fabricated using the analysis results. The impedance value of the fabricated waveguide was measured to be 42.7 kHz, which was consistent with the finite element analysis result with an error of 2.6 %. The rotational speed and power output were measured to be 10,001 rpm and 122.6 W. Thus, the developed milling waveguide can be applied to the milling process of high-hardness metals.
Keywords: Ultrasonic, Milling, Finite element method (FEM), Waveguide, Piezoelectric actuator |
This research was supported by the Korea Evaluation Institute of Industrial Technology (KEIT), under the Korea government Ministry of Knowledge Economy.
1. | Ensminger, D., Bond, L. J., 2012, Ultrasonics: Fundamentals, Technologies and Applications, CRC Press, New York. |
2. | Kim, H., Lee, Y., Lim, E., 2015, Dual-frequency Megasonic Waveguide for Nano-pattern Cleaning, IEEE Transactions on Semiconductor Manufacturing, 28:4 521-527. |
3. | Kim, H., Lim, E., Lee, Y., Park, J.-K., 2019, Fabrication and Performance Tests of an Ultrasonic Cleaning System for Solar-cell Wafers, Journal of The Korean Society of Manufacturing Technology Engineers, 28:4 210-217. |
4. | Kim, H., Lim, E., Park, J.-K., 2017, Development of a Ultrasonic System for Nano-Surface Reformation Process, Journal of The Korean Society of Manufacturing Technology Engineers, 26:4 365-370. |
5. | Luo, Y., Zhang, Z., Wang, X., Zheng, Y., 2010, Ultrasonic Bonding for Thermoplastic Microfluidic Devices Without Energy Director, Microelectronic Engineering, 87:11 2429-2436. |
6. | Jang, H. S., Park, W. Y., Park D. S., 2011, The Establishment of Bonding Conditions of Cu Using an Ultrasonic Metal Welder, Journal of The Korean Society of Manufacturing Technology Engineers, 20:5 570-575. |
7. | Lotfi, M., Amini, S., Aghaei, M., 2018, 3D FEM Simulation of Tool Wear in Ultrasonic Assisted Rotary Turning, Ultrasonics, 88 106-114. |
8. | Zhou, Z.-y., Yu, G.-l., Zheng, Q.-y., Ma, G.-z., Ye, S.-b., Ding, C., Piao, Z.-y., 2020, Wear Behavior of 7075-aluminum After Ultrasonic-assisted Surface Burnishing, Journal of Manufacturing Processes, 51 1-9. |
9. | Teimouri, R., Amini S., 2019, Analytical Modeling of Ultrasonic Burnishing Process: Evaluation of Active Forces, Measurement, 131 654-663. |
10. | Zhao, Q., Sun, Z., Guo, B., 2016, Material Removal Mechanism in Ultrasonic Vibration Assisted Polishing of Micro Cylindrical Surface on SiC, International Journal of Machine Tools and Manufacture, 103 28-39. |
11. | Yu, T., Guo, X., Wang, Z., Xu, P., Zhao, J., 2019, Effects of the Ultrasonic Vibration Field on Polishing Process of Nickel-based Alloy Inconel718, Journal of Materials Processing Technology, 273 16228. |
12. | Zahedi, A., Tawakoli, T., Akbari, J., 2015, Energy Aspects and Workpiece Surface Characteristics in Ultrasonic-assisted Cylindrical Grinding of Alumina–zirconia Ceramics, International Journal of Machine Tools and Manufacture, 90 16-28. |
13. | Wen, Y., Tang, J., Zhou, W., Zhu, C., 2019, Study on Contact Performance of Ultrasonic-assisted Grinding Surface, Ultrasonics, 91 193-200. |
14. | Kuo, K.-L., 2008, Design of Rotary Ultrasonic Milling Tool Using FEM Simulation, Journal of Materials Processing Technology, 201 48-52. |
15. | Ning, F., Cong, W., 2020, Ultrasonic Vibration-assisted (UV-A) Manufacturing Processes: State of the Art and Future Perspectives, Journal of Manufacturing Processes, 51 174-190. |
Hyunse Kim is principal researcher in Korea Institute of Machinery and Materials.His research topics include megasonic cleaning systems for semiconductors, ultrasonic manufacturing processes and ultrasonic cooling.
E-mail: hkim@kimm.re.kr
Euisu Lim is principal technician in Korea Institute of Machinery and Materials.His research topics include megasonic and ultrasonic cleaning systems for semiconductors and flat panel displays (FPD).
E-mail: eslim@kimm.re.kr
Kyunghan Kim is principal researcher in Korea Institute of Machinery and Materials.His research interest is laser machining and laser deposition for three-dimensional (3D) printing equipments.
E-mail: khkim@kimm.re.kr