한국생산제조학회 학술지 영문 홈페이지

Current Issue

Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 30, No. 2

[ Best Paper of This Month ]
Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 30, No. 1, pp.37-45
Abbreviation: J. Korean Soc. Manuf. Technol. Eng.
ISSN: 2508-5107 (Online)
Print publication date 15 Feb 2021
Received 16 Nov 2020 Revised 03 Jan 2021 Accepted 08 Jan 2021
DOI: https://doi.org/10.7735/ksmte.2021.30.1.37

유한요소법을 이용한 유연소자용 Au 나노구조체의 내구성 평가
남병현a ; 윤홍석a ; 최진일a, *

Durability Evaluation of Au Nanostructures for Flexible Devices using the Finite Element Method
Byung Hyun Nama ; Hongseok Youna ; Jinnil Choia, *
aDepartment of Mechanical Engineering, Hanbat National University
Correspondence to : *Tel.: +82-42-821-1083 E-mail address: jlchoi@hanbat.ac.kr (Jinnil Choi).

Funding Information ▼

초록

In this study, the levels of durability of nanostructures for flexible devices are explored based on tensile force, bending moment, and torsion. First, for application to optical devices, aluminium nanostructures are fabricated using laser interference lithography. The optical characteristics of the fabricated nanopatterns are investigated, and the structure with the highest light transmittance is selected for durability analysis. A structural analysis model using the finite element method is then developed and its reliability is validated through a comparison with the experimental data for both polyethylene terephthalate and Au thin films. Finally, the different levels of durability of the nanostructures are investigated for application based on tensile force, bending moment, and torsion. The structural weakness of each nanostructure is explored and the durability characteristics are highlighted.


Keywords: Nanostructure, Laser interference lithography, Flexible device, FEM (Finite Element Method), Durability

Acknowledgments

이 논문은 2017학년도 한밭대학교 대학회계연구비를 지원받아 작성되었음.


References
1. Khadem, M., Park, T. L., Penkov, O. V., Kim, D. E., 2018, Highly Transparent Micro-patterned Protective Coatings on Polyethylene Terephthalate for Flexible Solar Cell Applications, J. Sol. Energy., 171:1 629-637,
2. Lee, I. W., Park, Y. J., Gim, S. G., Ham, J. Y., Son, J. H., Lee, J. L., 2015, Spontaneously Formed Nanopatterns on Polymer Films for Flexible Organic Light‐Emitting Diodes, Small, 11:35 4480-4484,
3. Cho, K. S., Mandal, P., Kim, K. H., Lee, J. J., Baek, I. H., Lee, S. J., Lim, H. J., Cho, D. J., Kim, S. I., Rotermund, F., 2011, Improved Efficiency in GaAs Solar Cells by 1D and 2D Nanopatterns Fabricated by Laser Interference Lithography, Opt. Commun., 284:10-11 2608-2612,
4. Oh, Y. L., Lim, J. W., Kim, J. G., Wang, H., Kang, B. H., Park, Y. W., Kim, H. J., Jang, Y. J., Kim, J. Y., Kim, D. H., Ju, B. K., 2016, Plasmonic Periodic Nanodot Arrays via Laser Interference Lithography for Organic Photovoltaic Cells with >10% Efficiency, ACS Nano, 10:11 10143-10151,
5. Chang, S. H., Gray, S. K., Schatz, G. C., 2005, Surface Plasmon Generation and Light Transmission by Isolated Nanoholes and Arrays of Nanoholes in Thin Metal Films, Opt. Express, 13:8 3150-3165,
6. Bozzola, A., Liscidini, M., Andreani, L. C., 2012, Photonic Light-trapping Versus Lambertian Limits in Thin Film Silicon Solar Cells with 1D and 2D Periodic Patterns, Opt. Express, 20:S2 A224-A244,
7. Ali, B., Ashraf, M. W., Tayyaba, S., 2019, Simulation, Fuzzy Analysis and Development of ZnO Nanostructure-based Piezoelectric MEMS Energy Harvester, Energies, 12:5 807,
8. Dudem, B., Huynh, N. D., Kim, W., Kim, D. H., Hwang, H. J., Choi, D. H., Yu, J. S., 2017, Nanopillar-array Architectured PDMS-based Triboelectirc Nanogenerator Integrated with a Windmill Model for Effective Wind Energy Harvesting, Nano Energy, 42 269-281,
9. Kim, B. J., Cho, Y., Jung, M. S., Shin, H. A. S., Moon, M. W., Han, H. N., Nam, K. T., Joo, Y. C., Choi, I. S., 2012, Fatigue-Free, Electrically Reliable Copper Electrode with Nanohole Array, Small, 8:21 3300-3306,
10. Harris, K. D., Elias, A. L., Chung, H. J., 2016, Flexible Electronics under Strain: A Review of Mechanical Characterization and Durability Enhancement Strategies, J. Mater. Sci., 51 2771-2805,
11. Haque, M. A., Saif, M. T. A., 2002, Application of MEMS Force Sensors for in Situ Mechanical Characterization of Nano-scale Thin Films in SEM and TEM, Sens. Actuator A-Phys., 97-98 239-245,
12. Cuenot, S., Frétigny, C., Demoustier-Champagne, S., Nysten, B., 2004, Surface Tension Effect on the Mechanical Properties of Nanomaterials Measured by Atomic Force Microscopy, Phys. Rev. B, 69 165410
13. Choi, J. I., Chung, M. H., Dong, K. Y., Park, E. M., Ham, D. J., Park, Y. W., Song, I. S., Pak, J. J. H., Ju, B. K., 2011, Investigation on Fabrication of Nanoscale Patterns Using Laser Interference Lithography, J. Nanosci. Nanotechnol., 11:1 778-781,
14. Tadeson, G., Sabat, G., 2019, Enhancement of the Power Conversion Efficiency of Organic Solar Cells by Surface Patterning of Azobenzene Thin Films, ACS Omega, 4:26 21862-21872,
15. Menezes, J. W., Ferreira, J., Santos, M. J. L., Cescato, L., Brolo, A. G., 2010, Large-Area Fabrication of Periodic Arrays of Nanoholes in Metal Films and Their Application in Biosensing and Plasmonic-Enhanced Photovoltaics, Adv. Funct. Mater., 20:22 3918-3924,
16. Kim, S. H., Min, T. S., Choi, J. W., Baek, S. H., Choi, J. P., Aranas Jr, C., 2018, Ternary Bi2Te3-In2Te3-Ga2Te3 (n-type) Thermoelectric Film on a Flexible PET Substrate for use in Wearables, Energy, 144:1 607-618,
17. Kim, J. H., Nizami, A., Hwangbo, Y., Lee, H. J., Woo, C. S., Hyun, S. M., Kim, T. S., 2013, Tensile Testing of Ultra-thin Films on Water Surface, Nat. Commun., 4 1-6,
18. Hwangbo, Y., Kang, Y. P., Kim, J. H., Kim, D. J., Lee, H. J., 2012, Electromechanical Properties of Conductive MWCNT Film Deposited on Flexible Substrate Affected by Concentration of Dispersing Agent, Trans. Korean Soc. Mech. Eng. B, 36:5 517-521,
19. Lu, C., Lipson, R. H., 2010, Interference Lithography: A Powerful Tool for Fabricating Periodic Structures, Laser Photon. Rev., 4:4 568-580,
20. Boor, J. D., Geyer, N., Gösele, U., Schmidt, V., 2009, Three-beam Interference Lithography: Upgrading a Lloyd’s Interferometer for Single-exposure Hexagonal Patterning, Opt. Lett., 34:12 1783-1785,
21. Kim, D. M., Sonn, H. W., Hong, C. S., 1989, Three-Dimensional Mechanical Properties of Thick Advanced Composite Materials, Composites Research, 2:1 1-13.
22. Kang, H. S., Lee, S. H., 2020, Development of Vacuum Thin-Film-Forming Mold using Porous Aluminium, J. Korean Soc. Manuf. Technol. Eng., 29:6 435-440,

Byung Hyun Nam

M.Sc. in the Department of Mechanical Engineering, Hanbat National University.His research interest includes nanostructures.

E-mail: onam2100@naver.com

Hongseok Youn

Professor in the Department of Mechanical Engineering, Hanbat National University.His research interest includes flexible electronic devices.

E-mail: hsyoun@hanbat.ac.kr

Jinnil Choi

Professor in the Department of Mechanical Engineering, Hanbat National University.His research interest includes numerical analysis of multi-scale structures.

E-mail: jlchoi@hanbat.ac.kr