한국생산제조학회 학술지 영문 홈페이지

Current Issue

Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 31 , No. 6

[ Technical Papers ]
Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 31, No. 5, pp. 353-359
Abbreviation: J. Korean Soc. Manuf. Technol. Eng.
ISSN: 2508-5107 (Online)
Print publication date 15 Oct 2022
Received 16 Aug 2022 Revised 14 Sep 2022 Accepted 27 Sep 2022
DOI: https://doi.org/10.7735/ksmte.2022.31.5.353

중대형 선박 엔진용 냉각수 펌프 개발
이종옹a ; 김도태b, * ; 김신동a ; 홍종해a

Development of Cooling Water Pump for Medium and Large Marine Engines
Jong-Ong Leea ; Do-Tae Kimb, * ; Sin-Dong Kima ; Jong-Hae Honga
aYurim Industrial Co., LTD, Technology Institute
bDepartment of Mechanical Engineering, Kyungil University
Correspondence to : *Tel.: +82-53-600-5325 E-mail address: dtkim@kiu.ac.kr (Do-Tae Kim).


Abstract

The cooling pump for medium and large marine engines is a centrifugal pump, which circulates the coolant to cool the engine, lubricating oil and fresh water . As the built-in engine cooling water pump uses a large amount of power compared to other auxiliary equipment driven by the engine power of a ship, proper design of components, such as the impeller, is required to improve the pump efficiency to 60% or more, and without appearance of cavitation. In this study, the impeller, volute casing, and housing that correspond to various engine specifications of marine engine manufacturers, were used. The pump installed marine engines with a total efficiency of 60% or more were designed with CFturbo S/W. Performance tests of prototypes were conducted and the results were compared and reviewed. Ultimately, high efficiency and cavitation avoidance design technology of cooling water pump were acquired.


Keywords: Cooling water pump, Centrifugal pump, High efficiency, Impeller design, Pump performance test

Acknowledgments

이 연구는 중소벤처기업부에서 시행한 산학연 협력 기술개발사업(도약기술개발사업) 기술개발 결과보고서의 일부임을 밟힙니다.


References
1. IMO, 2021, viewed 29 September, 2022, Marine Environment Protection Committee (MEPC) 77, <https://www.imo.org/en/MediaCentre/MeetingSummaries/Pages/MEPC77.aspx>.
2. CFturbo, 2016,User manual for CFturbo 10 software, CFturbo Software & Engineering, Germany.
3. Lee, J. O., 2018, Development of Cooling Water Pump with High Efficiency for Marine Diesel Engines, Master Thesis, Kyungil University, Republic of Korea.
4. Tuzson, J., 2000, Centrifugal Pump Design, John Wiley & Son, Inc., New York.
5. Brennen, C. E., 2011, Hydrodynamics of Pumps, Cambridge University Press, U.K..
6. Subroto, Effendy, M., 2019, Optimization of Centrifugal Pump Performance with Various Blade Number, AIP Conf. Proc., 2114 020016.
7. Yang, S. S., Liu, H. L., Kong, F.Y., Xia, B., Tan, L.W., 2014, Effects of the Radial Gap Between Impeller and Volute Tongue Influencing the Performance and Pressure Pulsations of Pump as Turbine, J. Fluid Eng., 136:5 054501.
8. Fu, L., Zhu, X., Jiang, W., Li, G., 2017, Numerical Investigation on Influence of Diffuser Vane Height of Centrifugal Pump, Int. Commun. Heat Mass Transfer., 82 114-124.
9. Kye, B. J., Park, K.T., Choi, H. C., Lee, M. S., Kim, J. H., 2018, Flow Characteristics in a Volute-Type Centrifugal Pump Using Large Eddy Simulation, Int. J. Heat Fluid Flow., 72 52-60

Jong-Ong Lee

Senior researcher in Institute of Yulim industrial Co., LTD. His research interest is the design and manufacturing of cooling water pump in marine engines.

E-mail: ong51@hanmail.net

Do-Tae Kim

Professor in the Department of Mechanical Engineering, Kyungil University. His research interest is pump design, fluid power systems design and control.

E-mail: dtkim@kiu.ac.kr

Sin-Dong Kim

Senior manager in Institute of Yulim industrial Co., LTD. His research interest is the oil and cooling pump design in marine engines.

E-mail: sdkim@yurimcorp.com

Jong-Hae Hong

Director in Institute of Yulim industrial Co., LTD. His research interest is the design and manufacturing of cooling water pump in marine engines.

E-mail: jhhong0810@yurimcorp.com