한국생산제조학회 학술지 영문 홈페이지

Current Issue

Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 33 , No. 5

[ Article ]
Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 33, No. 4, pp. 192-199
Abbreviation: J. Korean Soc. Manuf. Technol. Eng.
ISSN: 2508-5107 (Online)
Print publication date 15 Aug 2024
Received 08 Jul 2024 Revised 30 Jul 2024 Accepted 31 Jul 2024
DOI: https://doi.org/10.7735/ksmte.2024.33.4.192

게이트 위치선정이 휴대용 구강용품 사출성형에 미치는 영향
김대호a, * ; 김동환b ; 홍준희c

Effect of Gate Positioning on Injection Molding of Portable Oral Products
Dae Ho Kima, * ; Dong Hwan Kimb ; Jun Hee Hongc
aDepartment of Research & Development, Daegyu Precision
bInnovation Center for Smart Optics, Hanbat National University
cDepartment of Mechanical Engineering, Chungnam National University
Correspondence to : *Tel.: +82-42-622-5634 E-mail address: scv3323@naver.com (Dae Ho Kim).

Funding Information ▼

Abstract

Products produced via injection molding, even if they have the same shape, can exhibit problems such as deformation and flow imbalance depending on the mold structure, which is determined by factors such as the gate location. In addition to problems with the product, there may be cases where the current mold design cannot be manufactured with the equipment the company has, and injection molding simulation is widely used to predict and prevent this.

In this study, to identify a suitable mold structure by analyzing the effect of the gate location of portable oral products produced via injection molding, a mold structure is adopted based on quantitative data obtained via injection-molding analysis. The results confirm that injection-molding analysis facilitates quality improvement.


Keywords: Computer aided engineering, Injection mold, Root industry, Warpage

Acknowledgments

본 논문은 대전테크노파크에서 지원하는 [2024 뿌리산업 활성화 지원사업]의 일환으로 수행되었습니다.


References
1. Woo, S. W., Park, S. H., 2016, Effects of Packing Pressure and Time on Injection Molding of Plastic Micro-channel Plates, J. Korean Soc. Manuf. Technol. Eng., 25:3 224-229.
2. Park, S. H., Lee, W. I., Moon, S. N., Yoo, Y. E., Cho, Y. H., 2011, Injection Molding Micro Patterns with High Aspect Ratio Using a Polymeric Flexible Stamper, Express Polym. Lett., 5:11 950-958.
3. Yoon, S. J., Cho, Y. M., 2017, Injection Molding Analysis of Smart Phone Camera VCM Housing, Design & Manufacturing, 11:3 13-18.
4. Park, J. Y., Yoon, G. S., Lee, J. W., Choi, J. M., 2013, A Study on Deformation of LSR Injection Moldings Having the Runners with Same Flow Distance, Design & Manufacturing, 7:1 60-63.
5. Jung, T. S., Jang, J. H., Kim, J. S., 2017, A Study on the Filling Pattern Imbalance by Width of Gate in the Thin Plate Injection Molding, Design & Manufacturing, 11:1 14-18.
6. Kim, H. K., 2020, A Study on Injection Molding Analysis of a Plastic Rack Gear, J. Korean Soc. Manuf. Process Eng., 19:8 50-55.
7. Han, S. R., 2017, A Study on the Deformation Optimization of a Plastic Bezel Assembled on the Steering Wheel of an Automobiles, J. Korean Soc. Manuf. Process Eng., 16:5 105-112.
8. Wi, E. C., Ko, M. S., Yun, Y. S., Baek, S. Y., Lee, J. B., Kim, M. S., Jang, S. M., 2022, Analysis of the Injection Molding Process for an Eco-pump Module Formed from Eco-friendly Materials, J. Korean Soc. Manuf. Technol. Eng., 31:1 70-76.

Dae Ho Kim

He is currently working as the Head of Research and Development at Daegyu Precision. His research interest is PDM, CAD/CAM, and Injection Mold.

E-mail: scv3323@naver.com

Dong Hwan Kim

He is working as Researcher at the Hanbat National University’s innovation Center for Smart optics. His research interest in Ultra-precision Processing.

E-mail: kimdh91@hanbat.ac.kr

Jun Hee Hong

Professor in the School of Mechanical Engineering, Chungnam National University. His research interest is Intelligent Measurement.

E-mail: hongjh@cnu.ac.kr