한국생산제조학회 학술지 영문 홈페이지

Home

Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 30 , No. 3

[ Papers ]
Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 30, No. 3, pp. 181-189
Abbreviation: J. Korean Soc. Manuf. Technol. Eng.
ISSN: 2508-5107 (Online)
Print publication date 15 Jun 2021
Received 19 Apr 2021 Revised 07 Jun 2021 Accepted 07 Jun 2021
DOI: https://doi.org/10.7735/ksmte.2021.30.3.181

GA 기법을 이용한 쇼트 블라스트 공정 최적화에 대한 연구
오원빈a ; 윤태종a ; 이보람a ; 이충우a ; 손준식b ; 박민호b ; 김일수a, *

A Study on the Optimization of Shot Blast Process Using GA Method
Won-Bin Oha ; Tae-Jong Yuna ; Bo-Ram Leea ; Chung-Woo Leea ; Joon-Sik Sonb ; Min-Ho Parkb ; Ill-Soo Kima, *
aDepartment of Mechanical Engineering, Mokpo National University
bSouthwestern Division, Research Institute of Medium & Small Shipbuilding
Correspondence to : *Tel.: +82-61-454-3455 E-mail address: ilsookim@mokpo.ac.kr (Ill-Soo Kim).


Abstract

A large amount of foreign matter on the surface of shipbuilding equipment leads to insufficient paint adsorption and extremely low film formation rates, causing various problems. Therefore, sufficient degreasing to remove foreign substances is important, and studies on various surface treatment technologies to form coating films with excellent adsorption is necessary. Therefore, in this study, a genetic algorithm (GA) technique was used to optimize the shot blast process parameters. The life of mechanical parts can be extended by increasing the adhesion of the coating film for aquaculture and increasing the elasticity and abrasion resistance of the parts. To this end, the surface roughness was examined via shot blasting experiments with various materials (SS400, S45C, and SUS304), and a mathematical model was developed. GA optimization techniques Perform an experiment to select the optimal process variable using.


Keywords: Shot blast, GA method, Mathematical model, Marine equipment, Shot ball, Optimization

References
1. Song, S. W., Ha, I. C., Song, B. S., Lee, G. D., 2004, Development of a Process Automation System to Improve the Working Environment of the Post-Treatment Process of Forged Products, Proc. Korean Soc. Precis. Eng. Spring Conf., 282.
2. Yang, Z. Y., Lee, Y. S., 2015, Predict of Residual Stress Distribution using Finite Element Analysis of Warm Peening, Proc. Korean Soc. Mech. Eng. Spring Conf., 28.
3. Cho, Y. H., Kim, T. H., Lee, S. C., Cheong, S. K., 2002, A Study on the Effects of Blasting and Shot Peening on the Fatigue Characteristics of Al 7075-T6, Proc. Korean Soc. Mech. Eng. Fall Conf., 310-314.
4. Choi, S. D., Cheong, S. H., Kim, G. M., Byun, Y. K., Kim, J. G., Yang, S. C., 2007, Influence of Mechanical property by Shot peening of Hinge Spring, Proc. Korean Soc. Manuf. Technol. Eng. Spring Conf., 753-758.
5. Oh, S. H., Cheong, S. K., Shin, K. H., 2018, Corrosion Resistance of Shot Peened Ti-6Al-4V by Additional Surface Treatment, J. Korean Soc. Manuf. Technol. Eng., 27:2 120-124
6. Lee, K. J., Lee, D. S., Lee, J. H., Cheong, S. K., 2005, A Study on the Improvement of the Durability of Drive Plate in Automobiles by Shot Peening, Proc. Korean Soc. Manuf. Technol. Eng. Spring Conf., 191-196.
7. Shin, Y. S., Jeong, S. K., Seo, Y. W., 1998, Fatigue Characteristics of SCM 22 Steel by Shot Peening, J. Korean Soc. Machine Tool Eng., 7:6 126-131.
8. Yoon, H. C., Kim, H. M., Choi, J. Y., Kim, J. S., 2017, Optimization of Shot Blast Processing of Automotive Oil-seal Metal Ring using Response Surface Analysis Method, Proc. Korean Soc. Automot. Eng. Fall Conf., 1158-1160.
9. Lee, H. J., Jung, H. Y., Park, W. J., 2009, Shot-Peening Process for Fatigue-Life Delay Effect of Laser Welding, Proc. Korean Soc. Mech. Eng. Spring Conf., 445-448.
10. Kim, J. Y., Kim, T. H., Cheong, S. K., 2002, Effects of Shot Peening on the Friction and Wear of a Metallic Material, Proc. Korean Soc. Mech. Eng. Fall Conf., 476-481.
11. Han, M. S., Jang, S. K., Kim, J. S., Kim, S. J., 2013, Evaluation on Cavitation Damage in Sea Water with Shot Peening Stand-off Distance for ALBC3 Alloy, Corrosion Science and Technology, 12:5 239-244
12. Lee, S. H., Kim, H. S., Cheong, S. K., 1998, Study on the Characteristics of Shot Peened Material, J. Korean Soc. Machine Tool Eng., 7:2 15-22.
13. Park, S. S., Lee, H. R., Kim, H. Y., Ahn, J. H., 2015, Study of Modeling Cut of Depth for Abrasive Water Jet using Regression Analysis, Proc. Korean Soc. Manuf. Technol. Eng. Fall Conf., 193.
14. Park, D. S., Yoo, W. S., Jin, Q. Q., Seong, E. J., Han, J. Y., 2007, Prediction of Material Removal and Surface Roughness in Powder Blasting using Neural Network and Response Surface Analysis, J. Korean Soc. of Manuf. Process Eng., 6:1 34-42.

Won-Bin Oh

The Master degree in Mechanical Engineering at Mokpo National University. He is currently pursuing Doctor degree.His area of research interest is automatic welding control. He is currently studying on prediction model.

E-mail: wboh@mokpo.ac.kr

Tae-Jong Yun

The Master degree in Mechanical Engineering at Mokpo National University. He is currently pursuing Doctor degree.His area of research interest is automatic welding control. He is currently studying on optimization of cutting.

E-mail: tjyun@mokpo.ac.kr

Bo-Ram Lee

The Master degree in Mechanical Engineering at Mokpo National University. She is currently pursuing Doctor degree.She is currently studying on numerical studies on mechanical characteristics for plasma cutting .

E-mail: boramess@mokpo.ac.kr

Chung-Woo Lee

He is currently pursuing his Master degree in Mechanical Engineering at Mokpo National University.His area of research interest is automatic control.

E-mail: enffl201@mokpo.ac.kr

Joon-Sik Son

Doctor in the Department of Mechanical Engineering, Mokpo National University.His research interest is automation facilities and artificial intelligence.

E-mail: jsson@rims.re.kr

Min-Ho Park

Doctor in the Department of Mechanical Engineering, Mokpo National University.His research interest is welding simulation.

E-mail: mhpark@rims.re.kr

Ill-Soo Kim

Professor of Mechanical Engineering, Mokpo National University. Dr. Kim worked as a researcher in industry and universities for over 20 years at University of Wollongong, Seoul National University, Mokpo National University.His area of research interest is automatic control.

E-mail: ilsookim@mokpo.ac.kr