Home | Browse Archives | About | For Contributors |
Sorry.
You are not permitted to access the full text of articles.
If you have any questions about permissions,
please contact the Society.
죄송합니다.
회원님은 논문 이용 권한이 없습니다.
권한 관련 문의는 학회로 부탁 드립니다.
[ Best Paper of This Month ] | |
Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 27, No. 3, pp. 167-174 | |
Abbreviation: J. Korean Soc. Manuf. Technol. Eng. | |
ISSN: 2508-5107 (Online) | |
Print publication date 15 Jun 2018 | |
Received 13 Mar 2018 Revised 23 Apr 2018 Accepted 27 Apr 2018 | |
DOI: https://doi.org/10.7735/ksmte.2018.27.3.167 | |
볼트결합 구조의 부재 강성 연구 | |
Study on Member Stiffness of Bolt Joint Structure | |
aISR Mechanical R&D Lab, LIGNex1 Co., Ltd., 207, Mabuk-ro, Giheung-gu, Yongin, Gyeonggi-do, 16911, Korea | |
Correspondence to : *Tel.: +82-31-288-9468, Fax: +82-31-288-9122, E-mail address:Hyunsu.Jung@lignex1.com (Hyun Su Jung). | |
Bolt joints are applied especially in equipment with severe temperature change during the operating. A change in the initial axial force of the bolt due to the dissimilar material of the members causes the performance deterioration of the equipment. The variation in the bolt axial force is influenced by the member stiffness. Many have studied the method of calculating the member stiffness in a bolt–nut joint. The studies have shown the same result for calculating the member stiffness in bolt joints. Bolts of sizes M4 to M8, and the thickness and material of various members were considered in the case study. Through finite element analysis, the analytical solution of member stiffness is calculated. An equivalent pressure cone model is used to calculate the theoretical solution. The analytical result and theoretical solution were almost equal. Additionally, we proposed a formula to calculate the member stiffness relatively easily in various cases.
Keywords: Bolted joint, Member stiffness, FEA, Contact |
1. | Bickford, J. H., 2007, Introduction to the Design and Behavior of Bolted Joints 4th Edition, CRC Press, New York. |
2. | Cho, H. K., 2017, Design Optimization of Bolted Connection with Wood Laminated Composite Beams Subjected to Distributed Loads, Journal of the Korean Society of Manufacturing Technology Engineers, 25:6 462-470. |
3. | Seo, Y. R., Park, K., Kim, S. K., Ra, S. W., 2011, Vibration Analysis for a Feeding Unit of Vision Inspection System of Precision Screws, Journal of the Korean Society of Manufacturing Technology Engineers, 4:8 446-451. |
4. | Shigley, J. E., 1977, Mechanical Engineering Design 3rd Edition, McGraw-Hill, New York. |
5. | Gould, H. H., Mikic, B. B., 1972, Areas of Contact and Pressure Distribution on Bolted Joints, ASME J. Eng. Ind., 94:3 864-870. |
6. | Osman, M. O. M., Mansour, W. M., Dukkipati, R. V., 1977, On the Design of Bolted Connections with Gaskets Subjected to Fatigue Loading, ASME J. Eng. Ind., 99:2 388-393. |
7. | Shigley, J. E., Mitchell, L. D., 1983, Mechanical Engineering Design 4rd Edition, McGraw-Hill, New York. |
8. | Shigley, J. E., Mischke, C. R., 1989, Mechanical Engineering Design 5rd Edition, McGraw-Hill, New York. |
9. | Wileman, M., Choudhury, M., Green, I., 1991, Computaion of Member Stiffness in Bolted Connections, ASME J. Mech. Des., 113:4 432-437. |
10. | Lehnhoff, T. F., Kwang, I. K., McKay, M. L., 1994, Member Stiffness and Contact Pressure Distribution of Bolted Joints, ASME J. Mech. Des., 116:2 550-557. |
11. | Pedersen, N. L., Pedersen, P., 2008, On prestress stiffness analysis of bolt-plate contact assemblies, Arch. Appl. Mech., 78:2 75-88. |
12. | Nassar, S. A., Abboud, A., 2009, An Improved Stiffness Model for Bolted Joints, ASME J. Mech. Des., 131:12 1210011-1210011. |
13. | Haidar, N., Obeed, S., Jawad, M., 2011, Mathematical representation of Bolted-Joint Stiffness: A New Suggested Model, J. Mech. Sci. Tech., 22:11 2827-2834. |
14. | Ito, Y., Toyoda, J., Nagata, S., 1979, Interface Pressure Distribution in a Bolt-Flange Assembly, ASME J. Mech. Des., 101:2 330-337. |