Journal Archive

Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 27 , No. 3

[Paper List] [Go to Volume List]


[ Special Issue : Seoul Tech Capstone Design ]
Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 27, No. 3, pp. 262-270
Abbreviation: J. Korean Soc. Manuf. Technol. Eng.
ISSN: 2508-5107 (Online)
Print publication date 15 Jun 2018
Received 04 Apr 2018 Revised 01 Jun 2018 Accepted 04 Jun 2018
DOI: https://doi.org/10.7735/ksmte.2018.27.3.262
소형화된 피동응축용 냉각탱크 내 온도분포와 비등현상에 관한 실험적 연구
이원석^a ; 송환준^a ; 김정우^a ; 박창용^a^{, *}

An Experimental Study on Temperature Distribution and Boiling Phenomena in a Small-Scaled Passive Condensate Cooling Tank
Won-Seok Lee^a ; Whanjoon Song^a ; Jungwoo Kim^a ; Chang Yong Park^a^{, *}
aDepartment of Mechanical System Design Engineering, Seoul National University of Science and Technology, 232, Gongneung-ro, Nowon-gu, Seoul 01811, Korea
Correspondence to : ^Tel.: +82-2-970-6360, Fax: +82-2-974-8270, E-mail address:*cypark@seoultech.ac.kr (Chang Yong Park).



Funding Information ▼ Seoul National University of Science and Technology

Abstract

An experimental study was conducted to investigate the water temperature distribution and saturated boiling phenomenon in a small-scale passive condensate cooling tank that is part of an emergency passive auxiliary feedwater system used in nuclear power plants. During the heating process using an electric heater inserted in the tank, the temperature of water was measured at 36 locations. Isothermal line contours were generated based on the experimental data. The contours indicated that the water above the heater location had a nearly uniform temperature due to free convection flow. Conversely, a strong temperature gradient was observed in the water below the heater location. The bubble departure diameters at the cylindrical heater surface were measured using images captured by a high-speed camera. The diameters were observed to be within the range of values predicted using existing correlations.


Keywords: Boiling, Nuclear power plant, Passive auxiliary feedwater system, Passive condensate cooling tank, Stratification, Temperature distribution

Acknowledgments

본 연구는 서울과학기술대학교 교내학술연구비 지원으로 수행되었으며 이에 감사드립니다.

References


1.	International Atomic Energy Agency, 1991, The Safety of Nuclear Power: Strategy for the Future, Proc. of an IAEA Conf., Vienna.
2.	International Atomic Energy Agency, 2009, Passive Safety Systems and Natural Circulation in Water Cooled Nuclear Power Plants, IAEA-TECDOC-1624.
3.	Moon, J. H., Kim, W. S., Kim, Y. I., Kim, M. J., Lee, H. J., 2016, A Conceptual Study of an Air-cooled Heat Exchanger for an Integral Reactor, The KSFM Journal of Fluid Machinery 19(2) 49-54.
4.	Bae, B.-U., Kim, S., Park, Y.-S., Kang, K.-H., 2014, Integral Effect Test and Code Analysis on the Cooling Performance of the PAFS (Passive Auxiliary Feedwater System) During an FLB (Feedwater Line Break) Accident, Nuclear Engineering and Design 275 249-263.
5.	Cho, Y.-J., Bae, S.-W., Bae, B.-U., Kim, S., Kang K.-H., Yun, B.-J., 2012, Analytical Studies of the Heat Removal Capability of a Passive Auxiliary Feedwater System (PAFS), Nuclear Engineering and Design 248 306-316.
6.	Kim, S., Bae, B.-U., Cho, Y.-J., Park, Y.-S., Kang, K.-H., Yun, B.-J., 2013, An Experimental Study on the Validation of Cooling Capability for the Passive Auxiliary Feedwater System(PAFS) Condensation Heat Exchanger, Nuclear Engineering and Design 260 54-63.
7.	Jeon, S.-S., Hong, S.-J., Cho, H.-K., Park, G.-C., 2015, Prediction of Nucleate Boiling Heat Transfer on Horizontal U-shaped Heat Exchanger Submerged in a Pool of Water Using MARS Code, Nuclear Engineering and Design 295 317-337.
8.	Cho, H. K., Cho, Y. J., Yoon, H. Y., 2014, Heat Structure Coupling of CUPID and MARS for the Multi-scale Simulation of the Passive Auxiliary Feedwater System, Nuclear Engineering and Design 273 459-468.
9.	Park, I. K., Yoon, H. Y., Park, H. B., 2018, Numerical Approach to Siphon Break Phenomena in a Research Reactor Pool Using the CUPID Code, Nuclear Engineering and Design 326 133-142.
*10.*	Kim, S., Kim, D. E., Ryu, S. U., Lee, S. T., Euh, D.-J., 2014, Experimental Investigation on the Natural Convection Flow in Pool Boiling, Nuclear Engineering and Design 280 349-361.
*11.*	Zuber, N., 1959, Hydrodynamic Aspect of Boiling Heat Transfer, U.S. AEC Report AECU 4439, June.
*12.*	Ruckenstein, E., 1963, Physical Model for Nucleate Heat Transfer from a Horizontal Surface, Appli. Mech. Rev. 16, Rev. 6055.
*13.*	Cole, R., 1967, Bubble Frequencies and Departure Volumes at Subatmospheric Pressure, AIChE J. 13 779-783.
*14.*	Borishanskiy, V. M., Danilova, G. N., Gotovskiy, M. A., Borishanskiy, A. V., Danilova, G. P., Kupriyanova, A. V., 1981, Correlation of Data on Heat Transfer in, and Elementary Characteristics of the Nucleate Boiling Mechanism, Heat Transfer-Sov. Res. 13 100-116.
*15.*	Jensen, M. K., Memmel, G. J., 1986, Evaluation of Bubble Departure Diameter Correlations, Proc. Eighth Int. Heat Transfer Conf., 4 1907-1912.
*16.*	Rohsenow, W. M., 1962, A Method of Correlation Heat Transfer Data for Surface Boiling of Liquids, Trans. ASME 84 969.
*17.*	Borishansky, V. M., 1969, Corelation of Effect of Pressure on the Critical Heat Flux and Heat Transfer Rates Using the Theory of Thermodynamic Similarity, In Problems of Heat Transfer and Hydraulics of Two-Phase Media, Pergamon Press, New York, 16-37.
*18.*	Stephan, K., Abdelsalam, M., 1980, Heat-transfer Correlations for Natural Convection Boiling, Int. J. Heat Mass Transfer 23, 73-87.