Journal Archive

[ Technical Papers ]
Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 27, No. 5, pp. 460-465
Abbreviation: J. Korean Soc. Manuf. Technol. Eng.
ISSN: 2508-5107 (Online)
Print publication date 15 Oct 2018
Received 20 Jun 2018 Revised 12 Sep 2018 Accepted 18 Sep 2018
DOI: https://doi.org/10.7735/ksmte.2018.27.5.460
2차 전지 전극생산 라인의 벨트피딩 시스템 설계 및 성능시험
민들레a ; 강호성a ; 김기환a ; 이영우a ; 박용근a ; 이응석a, *
Design and Performance Test of Belt Feeding System in Secondary Battery Electrode Production Line
Deulrae Mina ; Hosung Kanga ; Kihwan Kima ; Youngwoo Leea ; Yongun Parka ; Eungsuk Leea, *
aDepartment of Mechanical Engineering, Graduate School, Chungbuk National University, 1, Chungdae-ro, Seowon-gu, Cheongju, Chungbuk-do, 28644, Korea
Correspondence to : *Tel.: +82-43-261-2442 Fax: +82-303-3440-3422 E-mail address: eungsuk@cbnu.ac.kr (Eungsuk Lee).

This research is on the design and performance test for decreasing defect rate and improving the production speed of stacking machines used to build secondary battery electrodes. The key parameter that affects production speed and defect rate is the electrode film feeding system. There are two feeding system methods: gripper and belt. We chose the belt feeding method for the low-noise and high-speed production. However, the belt feeding method has a slip problem, which lowers production speed and increases the defect rate on the electrode film. Therefore, we designed a slipless belt feeding system to reduce slip. Removing slip to ensure accurate position leads to increased production speed, uniform size of electrodes, and lower defect rate. We designed the system and then manufactured to test target performance. The feed rate, cutting position accuracy, and zigzag displacement of the electrode were tested and evaluated.