한국생산제조학회 학술지 영문 홈페이지

Journal Archive

Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 28 , No. 2

[ Papers ]
Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 28, No. 2, pp. 79-85
Abbreviation: J. Korean Soc. Manuf. Technol. Eng.
ISSN: 2508-5107 (Online)
Print publication date 15 Apr 2019
Received 26 Dec 2018 Revised 11 Apr 2019 Accepted 12 Apr 2019
DOI: https://doi.org/10.7735/ksmte.2019.28.2.79

고경도 세라믹 가공을 위한 다이아몬드 드릴의 절삭성에 관한 연구
최상준a ; 김재선a ; 신재훈a ; 윤재웅b, *

Evaluation of the Machinability of Diamond Drills for High-hardness Ceramics
Sang-Joon Choia ; Jae-Seon Kima ; Jae-Hun Shina ; Jae-Woong Younb, *
aDepartment of Mechanical Engineering, Graduate School of Daegu University, 201, Daegudae-ro, Gyeongsan, Gyeongbuk-do, 38453, Korea
bDivision of Mechanical Engineering, Daegu University, 201, Daegudae-ro, Gyeongsan, Gyeongbuk-do, 38453, Korea
Correspondence to : *Tel.: +82-53-850-6684 Fax: +82-53-850-6689 E-mail address: jwyoun@daegu.ac.kr (Jae-Woong Youn).


Abstract

There has been a recent increase in the use of diamond tools with the increase in the use of high hardness materials. In this study, the machinability of high hardness ceramic materials was evaluated using an electro-deposited diamond drill. Specifically, the machinability of four types of drills was analyzed by changing the drill shape and electro-deposition method of the diamond particles to address the limitations of commonly used diamond drills. In addition to varying the cutting speed and feed rate, the cutting torque, diamond particle fall-out rate, and roughness of the machined surfaces were compared and analyzed. The results of this study will be helpful in tool design and setting the appropriate machining conditions to improve the machinability of high hardness ceramics using electrodeposited diamond tools.


Keywords: Diamond drill, High-hardness ceramic, Machinability, Drilling torque, Drill shape

References
1. MFG Korea, 2007, Current Status and Future Prospect of Cutting Tool Industry in Korea and Oversea, <http://www.ei.co.kr/content/view.asp?idx=6626>.
2. Kang, S. K., Song, M. S., Jee W. H., Cheong, K. J., Chung, S. C., 2007, Drilling Performance of the Diamond Tool, Proceedings of the KSMTE Spring Conference, 617-618.
3. Kwan, W. Y., Chang, S. C., 2008, Drilling Characteristics and Modeling of Diamond Core Drilling Processes, Journal of the Korean society of Manufacturing Technology Engineers 17:4 95-103.
4. Cabade, U. A., Dapkekar, D., Joshi, S. S., 2009, Modeling of Chip-tool Interface Friction to Predict Cutting Forces in machining of Al/SiCp Composites, International Journal of Machine Tools and Manufacture, 49 690-700.
5. Kwan, S. C., 2007, Condition Monitoring of Diamond Drilling Processes, Proceedings of the KSMTE Autumn Conference, 137-142.
6. Kim, K. M., Choi, S. D., Hong, Y. B., 2011, Influence of the Thickness of Diamond Core Drill on the Cutting Force, Proceedings of the KSMPE Spring Conference, 88-89.
7. Zhang, Q. H., Zhang, J. H., Sun, D. M., Wang, G. D., 2002, Study on the Diamond Tool Drilling of Engineering Ceramics, Journal of Materials Processing Technology, 112:2-3 232-236.
8. Zhou, L., Huang, S., Xu, L., Bai, D., Zhao, P., 2013, Drilling Characteristics of SiCp/Al Composites with Electroplated Diamond Drills, The International Journal of Advanced Manufacturing Technology, 69:5-8 1165-1173.
9. Tsubota, T., 2005, Composite Electro-plating of Ni and Surface-modified Particles with Silane Coupling Regent, Article in Diamond and Related Materials, 14:3 608-612.
10. Liu, W., Zhang, F. L., Lu, J. F., Chen, J. H., Huang, H. P., Zhou, Y. M., Tang, H.Q., 2018, Preparation of Ni3Al Bonded Diamond Core Drill with Ni-Cr Alloy and its Performance on Glass-Ceramic, Ceramics International, 44:18 23080-23087.
11. Churi, N., 2010, Rotary Ultrasonic Machining of Hard-to-Machine Materials, Department of Industrial and Manufacturing Systems Engineering College of Engineering, Doctor of Philosophy, Kansas State University, USA.
12. Yu, K. H., Cheong, C. Y., 1998, A study on the Precision Cutting Characteristics by the Diamond Tool on the Cutting Distance, Journal of the Korean Society of Manufacturing Technology Engineers, 7:5 127-133.
13. Lee, J. W., 2006, Tool-Wear Characteristics of Ceramic, CBN and Diamond Tools in Turning of the Pre Sintered Low Purity Alumina, Journal of the Korean Society of Precision Engineering, 23:1 80-88.
14. Kim, K. M., Choi, S. D., Kim, G. M., 2010, A Study on the Wearing Behavior of Diamond Tool Used to Machining of Ceramics, Proceedings of the KSMTE Autumn Conference, 108-109.