Journal Archive

Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 28 , No. 3

[Paper List] [Go to Volume List]


[ Special Issue : High-reliability machine part design technologies ]
Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 28, No. 3, pp. 188-192
Abbreviation: J. Korean Soc. Manuf. Technol. Eng.
ISSN: 2508-5107 (Online)
Print publication date 15 Jun 2019
Received 07 May 2019 Revised 07 Jun 2019 Accepted 12 Jun 2019
DOI: https://doi.org/10.7735/ksmte.2019.28.3.188
Ag 입자 차이에 따른 신축성 Ag 페이스트의 전기-기계적 특성 연구
강선영^a^{, *} ; 박민영^b ; 장동영^a


Electro-mechanical Properties of Stretchable Ag Paste by the Difference of Ag Particles
Sun-Young Kang^a^{, *} ; Min-Young Park^b ; Dong-Young Jang^a
aDept. Of Manufacturing Systems and Design Engineering, Seoul National University of Science and Technology, 232, Gongneung-ro, Nowon-gu, Seoul 01811, Korea
bKorea Electronics-Machinery Convergence Technology Institute (KEMCTI), 232, Gongneung-ro, Nowon-gu, Seoul 01811, Korea
Correspondence to : ^*Tel.: +82-2-970-6450 Fax: +82-2-6499-1883 E-mail address: dyjang@seoultech.ac.kr (Dong-Young Jang).

Abstract

In this study, silver paste was made with and without M13(sol) particles, and then electrodes were printed using screen printing. The conductivity changes and electro-mechanical properties of the printed electrodes were studied using the stretching test, bending test, and bending figure test. For silver pastes with M13(sol) particles, the resistance was measured up to 140% with increased strain. In contrast, the bending test and bending figure test showed no change in resistance regardless of the presence of M13(sol) particles. The scanning electron microscope was used to observe the particle difference, and indicated that holes generated by the sintered flakes were connected by non-sintered M13(sol) particles at 130 °C for improved flexibility.


Keywords: Stretchable electrode, Flat type Ag, Ag paste, Screen printing, Mechanical test

Acknowledgments

이 논문은 2019년 서울과학기술대학교 기술경영융합대학 MSDE 전공의 지원을 받아 수행되었습니다.

References


1.	Tran, T. Q., Lee, N. E., 2016, Recent Progress on Stretchable Electronic Devices with Intrinsically Stretchable Components, Adv. Mater, 29:3 1-2.
2.	Din, S., Xu, W., Nam, Cheng. L. K., Dirven, S., 2017, A Stretchable Multimodal Sensor for Soft Robotic Applications, IEEE Sensors Journal, 17:17 1-2.
3.	Nam, S. Y., Lim, C. G., Nam, H. M., Gyun, B. S., 2016, The Properties of Printed Electrode Patterns on the Stretchable Films, J. Korean Society for Imaging Science & Technology, 22:2 1-6.
4.	Nam, S. Y., Kwon, B. S., Nam, H. J., Nam, K. W., Park, H. Z., 2018, Properties of Stretchable Electrode Pattern Printed on Urethane Film, J. Korean Society for Power System Engineering, 22:1 64-71.
5.	Kim, G. D., Nam, H. M., Yang, S. S., Park, L. S., Nam, S. Y., 2017, Filling and Wiping Properties of Silver Nano Paste in Trench Layer of Metal Mesh Type Transparent Conducting Electrode Films for Touch Screen Panel Application, J. Korean Powder Metall. Inst., 24:6 1-8.
6.	Lee, C. G., Kwon, B. S., Nam, H. M., Seo, D. M., Park, J. W., Hwangbo, H., Park, L. S., Nam, S. Y., 2018, Stretchable Strain Sensors Fabricated by Screen Printing of Silver Paste on the Surface Modified Transparent Elastomeric Polyurethane Films, Materials Sciences and Applications, 9:13 1008-1020.
7.	Larmagnac, A., Eggenberger, S., Janossy, H., Vörös, J., 2014, Stretchable Electronics Based on Ag-PDMS Composites, Scientific reports, 4 7254.
8.	Jeong, J. W., Kim, S. W., Cho, J. H., Hong, Y. T., 2009, Stable Stretchable Silver Electrode Directly Deposited on Wavy Elastomeric Substrate, IEEE Electron Device Letters, 30:12 1284-1286.
9.	Lee, G. B., Nah, C. W., 2012, Preparation and Property of Flexible/Stretchable Electrodes, Elastomers and Composites, 47:4 272-281.