한국생산제조학회 학술지 영문 홈페이지

Journal Archive

Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 28 , No. 4

[ Papers ]
Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 28, No. 4, pp. 224-231
Abbreviation: J. Korean Soc. Manuf. Technol. Eng.
ISSN: 2508-5107 (Online)
Print publication date 15 Aug 2019
Received 18 Jun 2019 Revised 01 Aug 2019 Accepted 02 Aug 2019
DOI: https://doi.org/10.7735/ksmte.2019.28.4.224

보텍스 방식의 비접촉 그리퍼에서 에어 헤드 형상이 파지력과 스월 유동 안정성에 미치는 영향
김준현a ; 성재용b, *

Influence of Air Head Shape on Lifting Force and Stability of Swirl Flow in a Vortex-Type Non-Contact Gripper
Joon Hyun Kima ; Jaeyong Sungb, *
aNDT Center, Seoul National University of Science & Technology 232 Gongneung-ro, Nowon-gu, Seoul 01811, Korea
bMechanical and Automotive Engineering, Seoul National University of Science & Technology 232 Gongneung-ro, Nowon-gu, Seoul 01811, Korea
Correspondence to : *Tel.: +82-2-970-6398 Fax: +82-2-949-1458 E-mail address: jysung@seoultech.ac.kr (Jaeyong Sung).

Funding Information ▼

Abstract

A vacuum for non-contact gripping can be generated using a circular air head. The present study has numerically investigated the influence of the air head shape on the vacuum lifting force and swirl flow stability in a vortex-type non-contact gripper. The grip stabilities of swirl and lifting force variations were analyzed according to the air head end-effector, head chamber, and inner column sizes. Results show that the maximum lifting force occurs at a gap thickness of about 0.5 mm . Although in general, the longer the tip length, the larger the vacuum pressure that forms, an optimum tip length exists when considering the lifting force stability as a small head height might lead to unstable swirl flow. To enhance the stability of swirl, the installation of an inner column is an acceptable alternative irrespective of the 20 to 30% reduction of lifting force.


Keywords: Non-contact gripper, Bernoulli levitation, End-effector, Swirl flow, Air head, Lifting force

Acknowledgments

이 연구는 2019년 과학기술정보통신부의 재원으로 한국연구재단의 지원을 받아 수행된 기초연구사업임(No. 2019R1F1A1056931).


References
1. Nakazawa, N., Kim, I-h., Inooka, H., Ikeura, R., 2001, Force Control of a Robot Gripper Based on Human Grasping Schemes, Control Engineering Practice, 9:7 735-742.
2. Pham, D. T., Tacgin, E., 1992, GRIPPEX: A Hybrid Expert System for Selecting Robot Gripper Types, Int. J. Mach. Tools Manufact., 32:3 349-360.
3. Fantoni, G., Santochi, M., Dini, G., Tracht, K., Scholz-Reiter, B., Fleischer, J., Lien, T. K., Seliger, G., Reinhart, G., Franke, J., Hansen, H. N., Verl, A., 2014, Grasping Devices And Methods in Automated Production Processes, CIRP Annals - Manufacturing Technology, 63:2 679-701.
4. Fantoni, G., Capiferri, S., Tilli, J., 2014, Method for Supporting the Selection of Robot Grippers, Procedia CIRP, 21 330-335.
5. Sakiv, V., Mykhailyshyn, R., Dunchon, F., 2019, Gasdynamic Analysis of the Bernoulli Grippers Interaction with the Surface of Flat Objects with Displacement of the Center of Mass, Vacuum, 159 524-533.
6. Rhim, W-K., Ohsaka, K., Paradis, P-F., 1999, Noncontact Technique for Measuring Surface Tension and Viscosity of Molten Materials using High Temperature Electrostatic Levitation, Review of Scientific Instruments, 70:6 2796-2801.
7. Li, X., Kagawa, T., 2013, Development of a New Noncontact Gripper using Swirl Vanes, Robotics and Computer-Integrated Manufacturing, 29:1 63-70.
8. Kim, J. H., Kim, Y. G., Ahn, S. W., Kim, Y. S., 2013, Design of Non-Contact Pick-Up Head for Carrying Large Flat Sheets, Journal of the Korean Society of Manufacturing Technology Engineers, 22:6 937-944.
9. Kim J. H., Lee, S-J., 2015, Configuration of Noncontact Grip System for Carrying Large Flat Sheets using Vacuum Air Heads, Journal of Tribology, 137:4 041103.
10. Burn, X. F., Melkote, S. N., 2009, Modeling and Prediction of the Flow, Pressure, and Holding Force Generated by a Bernoulli Handling Device, Journal of Manufacturing Science and Engineering, 131:3 031018.
11. Sam, R., Nefti, S., 2011, A Novel, Flexible and Multi-Functional Handling Device Based on Bernoulli Principle, IEEE International Conference on System Engineering and Technology (ICSET), 166-171.
12. Lee, T. G., Yu, J. S., Jung, H. J., Kim, J-H., Kim, J. H., 2013, Development of the Air Floating Conveyor System for the Large Glass Sheet, Journal of the Korean Society of Manufacturing Technology Engineers, 22:4 635-642.
13. FiPA, viewed 21 April 2019, Special Vacuum Cups - Bernoulli Vacuum Cups - Series SX-B, Notes <http://www.fipa.com>.
14. Ishimoto, J., Hoshina, H., Tsuchiyama, T., Watanabe, H., Haga, A., Sato, F., 2007, Integrated Simulation of the Atomization Process of a Liquid Jet through a Cylindrical Nozzle, Interdisciplinary Information Sciences, 13:1 7-16.
15. Wang, Y., Yang, V., 2018, Central Recirculation Zones and Instability Waves in Internal Swirling Flows with an Annular Entry, Physics of Fluids, 30:1 013602.