Journal Archive

Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 29 , No. 2

[Paper List] [Go to Volume List]


[ Papers ]
Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 29, No. 2, pp. 112-119
Abbreviation: J. Korean Soc. Manuf. Technol. Eng.
ISSN: 2508-5107 (Online)
Print publication date 15 Apr 2020
Received 24 Mar 2020 Revised 10 Apr 2020 Accepted 14 Apr 2020
DOI: https://doi.org/10.7735/ksmte.2020.29.2.112
고경도 소재 가공을 위한 다이아몬드 전착 드릴의 형상 최적화에 관한 연구
최상준^a ; 김재선^a ; 윤재웅^b^{, *}


Design Optimization of Diamond Electro-Deposited Drill for High-Hardness Workpiece Machining
Sang-Joon Choi^a ; Jae-Seon Kim^a ; Jae-Woong Youn^b^{, *}
aDepartment of Mechanical Engineering, Graduate School of Daegu University
bDivision of Mechanical Engineering, Daegu University
Correspondence to : ^*Tel.: +82-53-850-6684 E-mail address: jwyoun@daegu.ac.kr (Jae-Woong Youn).



Funding Information ▼ Daegu University

Abstract

Recently, there has been an increase in the demand for the machining of high-hardness materials using diamond electro-deposition tools. However, a systematic analysis of these tools in terms of machinability has not been performed yet. In this study, a tool design optimization is performed to improve the machinability of diamond electro-deposition drills in drilling SiC ceramic materials. Each drill is analyzed using FEM analysis and the results are compared with the corresponding experimental results. Additionally, the particle drop rate and surface roughness of the machined surface are analyzed for each drill. Consequently, we discover that the most important aspect in drilling using a diamond electro-deposition drill is the proper discharge of the machined chip. Furthermore, we determine the optimal drill shape for the improvement of machinability.


Keywords: Electro-deposited drill, Drill shape, FEM analysis, High-Hardness workpiece, Chip flow

Acknowledgments

이 논문은 2019학년도 대구대학교 학술연구비 지원에 의한 논문임.

References


1.	Kang, S. K., Song, M. S., Jee, W. H., Cheng, K. J., Chung, S. C., 2007, Drilling Performance of the Diamond Tool, Korean Society of Precision Engineering Autumn Conference, 617-618.
2.	Kwan, W. Y., Chang, S. C., 2008, Drilling Characteristics and Modeling of Diamond Core Drilling Processes, Journal of the Korean Society of Manufacturing Technology Engineers ,17:4 95-103.
3.	Zhang, Q. H., Zhang, J. H., Sun, D. M., Wang, G. D., 2002, Study on the Diamond Tool Drilling of Engineering Ceramics, Journal of Materials Processing Technology, 122:2-3 232-236.
4.	Zhou, L., Huang, S., Xu, L., Bai, D., Zhao, P., 2013, Drilling Characteristics of SiCp/Al Composites with Electroplated Diamond Drills, The International Journal of Advanced Manufacturing Technology, 69 1165-1173.
5.	Liu, W., Zhang, F. L., Lu, J. F., Chen, J. H., Huang, H. P., Zhou, Y. M., Tang, H. Q., 2018, Preparation of Ni₃ Al Bonded Diamond Core Drill with Ni-Cr Alloy and Its Performance on Glass-ceramic, Ceramics International, 44 23080-23087.
6.	Park, S. H., Kim, K. M., Choi, S. D., Hong, Y. B., 2011, A Study on the Wearing Behavior of Diamond Tool used to Machining of Ceramics, KSMPE, 10:1 73-79.
7.	Arai, S., Wilson, Stephen., Corbett, J., Whatmore, R. W., 2009, Ultra-precision Grinding of PZT Ceramics-Surface Integrity Control and Tooling Design, International Journal of Machine Tools & Manufacture, 49:12-13 998-1007.
8.	Masood, M., Thomas, R., Luiz, F., Suchay, Y., 2018, Wear Response of Impregnated Diamond Bits, Wear, 410-411 34-42.
9.	Choi, S. J., Kim, J. S., Shin, J. H., Youn, J. W., 2019, Evaluation of the Machinability of Diamond Drills for High-hardness Ceramics, Journal of the Korean Society of Manufacturing Technology Engineers, 28:2 79-85.
*10.*	Hans, K. T., Berend, D., 2013, Basics of Cutting and Abrasive Processes, Springer, Germany.

Sang-Joon Choi

Ph.D. candidate in the Department of Mechanical Engineering, Daegu University.His research interest is precision machining.

E-mail: joon-1204@daum.net

Jae-Seon Kim

Master student of Mechanical Engineering, Daegu University.His research interest is machining system.

E-mail: sungogo2@naver.com

Jae-Woong Youn

Professor in the Department of Mechanical Engineering, Daegu University.His research interest is machining system

E-mail: jwyoun@daegu.ac.kr