한국생산제조학회 학술지 영문 홈페이지

Journal Archive

Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 29 , No. 4

[ Best Paper of This Month ]
Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 29, No. 4, pp. 267-273
Abbreviation: J. Korean Soc. Manuf. Technol. Eng.
ISSN: 2508-5107 (Online)
Print publication date 15 Aug 2020
Received 31 Mar 2020 Revised 09 Jun 2020 Accepted 19 Jun 2020
DOI: https://doi.org/10.7735/ksmte.2020.29.4.267

대면적 레이저 직접묘화 공정에서 비점수차 자동초점 기술 연구
김기홍a, * ; 최기봉a

Astigmatic Autofocus for Large Area Direct Laser Writing
Geehong Kima, * ; Keebong Choia
aNano-Convergence Systems Research Division, Korea Institute Machinery and Materials
Correspondence to : *Tel.: +82-42-868-7076 E-mail address: geehong@kimm.re.kr (Geehong Kim).

Funding Information ▼

Abstract

We developed an astigmatic autofocus optics and a control unit which were implemented in a direct laser writing system for a large area patterning process. The autofocus module is comprised of a collimated laser, a quadrant photodiode, an astigmatic lens, and a few polarizing optics. This system has a 0.526 V/μm focus error signal resolution in the 50x objective lens and a surface tracking capability of under 1 mm/s XY translation stage speed. In this study, we conducted a patterning experiment using SU-8 photocurable resist on a silicon wafer to study the accuracy of the astigmatic autofocus system. We highlighted some features of this system for future improvement.


Keywords: Autofocus, Astigmatism, Direct laser writing, 3D patterning

Acknowledgments

이 논문은 산업통산자원부의 재원으로 한국산업기술진흥원의 지원을 받아 수행된 산업기술혁신사업입니다(N0002310).


References
1. Baldacchini, T., 2016, Three-dimensional Microfabrication Using Two-photon Polymerization, Elsevier, USA.
2. Lee, K. S., Yang, D. Y., Park, S. H., Kim, R. H., 2006, Recent Developments in the use of Two-photon Polymerization in Precise 2D and 3D Microfabrications, Polym. Adv. Technol., 17 72-82.
3. Kim, G. E., Lee, M. G., Lee, S. H., Hong, M. S., Jeon, Y. H., Park, J. K., 2013, Optomechanical Optimization of Dynamic Focusing Unit for 3D Laser Scanner, Proc. Korean Soc. Manuf. Technol. Eng. Autumn Conf., 314.
4. Paik, B. M., Lee,J. H., Lee, K. S., 2012, Development of Three Dimensions Laser Direct Patterning System, J. Korean Soc. Manuf. Technol. Eng., 21:1 116-122.
5. Hsu ,W. Y., Lee, C. S., Chen, P. J., Chen, N. T., Chen, F. Z., Yu, Z. R., Kuo ,C. H., Hwang, C. H., 2009, Development of the Fast Astigmatic Auto-focus Microscope System, Meas. Sci. Technol., 20 1-9.
6. Rhee, H. G., Kim, D. I., Lee ,Y. W., 2009, Realization and Performance Evaluation of High Speed Autofocusing for Direct Laser Lithography, Rev. Sci. Instrum., 80 073103.
7. Kim, Y. G., Ghim, Y. S., Rhee, H. G., 2019, Auto-focusing System Control for 3D Lithography of Direct Laser Lithographic System, Proc. Korean Soc. Manuf. Technol. Eng. Autumn Conf., 108.

Geehong Kim

Senior Researcher in the Nano-Convergence Systems Research Division, Korea Institute of Machinery and Materials.His research interest is 3D structure fabrication in nano and micro scale using two-photon polymerization.

E-mail: geehong@kimm.re.kr

Keebong Choi

Senior Researcher in the Nano-Convergence Systems Research Division, Korea Institute of Machinery and Materials.His research interest is the design and control of piezo-driven mechanism for ultra-precision motion .

E-mail: kbchoi@kimm.re.kr