Journal Archive

Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 31 , No. 2

[Paper List] [Go to Volume List]


[ Papers ]
Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 31, No. 2, pp. 86-93
Abbreviation: J. Korean Soc. Manuf. Technol. Eng.
ISSN: 2508-5107 (Online)
Print publication date 15 Apr 2022
Received 03 Jan 2022 Revised 01 Feb 2022 Accepted 14 Feb 2022
DOI: https://doi.org/10.7735/ksmte.2022.31.2.86
CAD/CAE/CAM을 활용한 금형형상 가공에 관한 연구
한규택^a^{, *}

A Study on the Die Shape Machining using CAD/CAE/CAM System
Kyu Taek Han^a^{, *}
aDepartment of Mechanical Engineering, Pukyong National University
Correspondence to : ^*Tel.: +82-51-629-6135 E-mail address: kthan@pknu.ac.kr (kyu Taek Han).



Funding Information ▼ Pukyong National University

Abstract

The purpose of this study is to investigate the relationship between the surface roughness and cutting force for the die shape and factor change using CAD/CAE/CAM. RPM, feed rate, and step over were chosen as the main factor for cutting force. To estimate the correlation between cutting force and surface roughness, cutting force was predicted using the DOE(design of experiments) and DEFORM^TM-3D(software of finite element analysis), surface roughness was measured through experiments. The optimal level for each factor was considered, and the most effective factor was evaluated using the Taguchi method(one of DOE). In this study, the machining conditions to obtain a particular surface roughness based on the measured value were derived.


Keywords: CAD/CAE/CAM system, Effective machining, Toolpath, Surface roughness

Acknowledgments

이 논문은 부경대학교 자율창의학술연구비(2021년)에 의하여 연구되었음.

References


1.	Han, K. T., Park, J. H., 2021, Research on Effective Machining by CAD/CAE/CAM System, Proc. KSMPE Spring Conf. 2021., 181-182.
2.	Han, K. T., Park, J. H., Gu, B. S., 2014, Research on Die Machining using 3D Printing and CAM System, Proc. Korean Soc. Mech. Eng. Spring Conf. 2014, 281-286.
3.	Han, K. T., Park, J. H., Lee, V., Kim, J. H., 2013, A Study on Die Machining using CAD/CAM System (PowerSHAPE/MILL), Proc. Korean Soc. Mech. Eng. Spring Conf. 2013, 125-129.
4.	Shaw, M. C., 1984, Metal Cutting Principles, Clarendon Press, Oxford, U.K.
5.	Altintas, Y., Chan, P. K., 1992, In-Process Detection and Suppression of Chatter in Milling, Int. J. Mach. Tools Manuf., 32:3 329-347.
6.	Minis, I., Yanushevsky, R., Tembo, A., Hocken, R., 1990, Analysis of Linear and Nonlinear Chatter in Milling, CIRP Ann-Manuf. Technol., 39:1 459-462.
7.	Lee, S. Y., Im, Y. M., 2004, Prediction and Experiments of Cutting Forces in End Milling, J. Korean Soc. Manuf. Technol. Eng., 13:4 9-15.
8.	Choi, H. J., Choi, D. S., Jeon, E. C., Je, T. J., 2012, Relation of Cutting Force and Surface Roughness with Various Cutting Conditions in Ultra-fine End-milling, Proc. KSMPE Autumn Conf. 2012, 146.
9.	Park, H. Y., Bae, M. W., Jung, H., Kang, M. S., 2010, Effect of Cooling Method on Surface Roughness in High-speed Machining, Proc. Korean Soc. Automot. Eng Annual Conf. 2010, 2679-2684.
*10.*	Kim, J. D., Yoon, M. C., 2014, An Analysis of Cutting Force according to Specific Force Coefficients, J. Korean Soc. Manuf. Process Eng., 13:2 108-116.
*11.*	Jin, D. H., Kim, J. D., Yoon, M. C., 2013, Surface Roughness Model of End-milling Surface, J. Korean Soc. Manuf. Process Eng., 12:2 68-74.
*12.*	Jeon, E. C., Lee, S. Y., Lee, W. H., Kim, D. H., Chun, J. D., 2011, A Study on the Improvement of Productivity and Surface Roughness in Mold Machining using the Optimization of Cutting Force, J. Korean Soc. Manuf. Technol. Eng., 20:6 824-829.
*13.*	Kim, C. Y., 2012, An Experimental Study of Al2017 on Characteristics of the Surface Roughness in Machining Center Processing, J. Korean Soc. Manuf. Process Eng., 11:3 68-72.
*14.*	Cho, J. H., Hwang, I. H., Park, S. H., Lee, J. C., 2013, Study on the Machining Characteristics of Cutting Inserts, J. Korean Soc. Manuf. Process Eng., 12:3 76-80.
*15.*	Yang, J. S., Jung, T. S., Kim, Y. G., 2006, Surface Texture and Roughness of Inclined Surface Milled by Long Neck Ball Endmill, Proc. Korean Soc. Precis. Eng. Spring Conf. 2006, 565-566.
*16.*	Kim, D. H., Yoon, J. S., Lee, D. Y., 2019, Estimation of Tangential Cutting Force using Spindle Load of CNC Machining Center, J. Korean Soc. Manuf. Technol. Eng., 28:6 343-349.

Kyu Taek Han

Professor in the Department of Mechanical Engineering, Pukyong National University. His research interest is Computer Aided Manufacturing.

E-mail: kthan@pknu.ac.kr