[ Papers ]

Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 27, No. 6, pp.539-545

ISSN: 2508-5093 (Print) 2508-5107 (Online)

Print publication date 15 Dec 2018

Received 22 Aug 2018 Revised 20 Sep 2018 Accepted 04 Oct 2018

DOI: https://doi.org/10.7735/ksmte.2018.27.6.539

산업용 유압실린더 재제조 기술개발

이규창^a

; 손우현^a ; 박상진^a ; 목학수^a^{, *}

Remanufacturing Technology Development of Industrial Hydraulic Cylinder

Kyu-Chang Lee^a

; Woo-Hyun Son^a ; Sang-Jin Park^a ; Hak-Soo Mok^a^{, *}

aDepartment of Industrial Engineering, Pusan National University, 2, Busandaehak-ro 63beon-gil, Geumjeong-gu, Busan 46241, Korea

Correspondence to: ^*Tel.: +82-51-510-2426 Fax: +82-51-512-7603 E-mail address: hsmok@pusan.ac.kr (Hak-Soo Mok).

Abstract

Remanufacturing has attracted increasing attention for its importance role in sustainable development and for being one of the most important green technologies. Remanufacturing is expanding into various industries such as machinery, construction machinery, shipbuilding, and aerospace. In this study, a standard remanufacturing process for an industrial hydraulic cylinder was developed by using remanufacturing process analysis and failure mode and effect analysis (FMEA). Moreover, improvements were found for resolving the critical process. Finally, evaluation of the remanufactured hydraulic cylinder was conducted according to a reliability standard, to check its performance (output of the cylinder). The developed remanufacturing standard process resulted in increased productivity and remanufacturing of a like-new product.

Keywords:

Remanufacturing, Hydraulic cylinder, FMEA, Standard process, Performance evaluation

Acknowledgments

이 논문은 부산대학교 기본연구지원사업(2년)에 의하여 연구되었음.

References

Yang, S. S., Ong, S. K., Nee, A. Y. C., 2016, A Decision Support Tool for Product Design for Remanufacturing, Procedia CIRP, 40 144-149. [https://doi.org/10.1016/j.procir.2016.01.085]
Seo, Y. K., 2016, A Study on the Estimation of Durability Life Affected by Processing Dimension in Remanufacturing of Birfield Joint, A Thesis for a Doctorate, Chungnam National University, Republic of Korea.
Park, B. G., 2017, FMEA Case Study for Remanufacturing ATC Performance Assurance, A Thesis for a Master, Changwon National University, Republic of Korea.
Ha, J. H., Woo, Y. S., Roh, Y. H., Lee, C. M., 2017, A Study on the Development of Standardization Technology for Remanufacturing Process of Used Vertical Machining Center, J. Korean Soc. Precis. Eng., 34:8 517-524.
Son, W. H., Park, S. J., Jeong, J. Y., Kim, J. H., Bin, H. W., Mok, H. S., 2016, Analysis of Throttle Body’s Remanufacturing Process and RPN, J. of Korean Inst. of Resource Recycling, 25:4 11-22.
Mok, H. S., Song, H. S., Kim, D. J., Hong, J. E., Lee, S. M., Ahn, J. T., 2014, Standard Process Design of Remanufacturing of LPG Vaporizer by Using FMEA, J. of Korean Inst. of Resource Recycling, 23:6 54-62.
S, Y. K., Jung, D. H., Yu, S. S., Rha, W. Y., 2016, The Optimization Study on the Test Method of Remanufactured Power Steering Oil Pump by Using FMEA, Transaction of the Korean Society of Automotive Engineers, 24:1 90-98.
Tracy Philip Omdahl, 1988, Reliability, Availability, and Maintainability Dictionary, ASQC Quality Press, USA.
Kim, M. H., Jin, E. J., Park, G. M., 2013, Using Failure Mode and Effects Analysis to Design a Comfortable Automotive Driver Seat, Journal of Korea Multimedia Society, 16:1 87-99.
Mike, Kolich., 2014, Fault Tree Analysis and Fault Modes and Effect Analysis for Security Evaluation of IC Card Payment System, Applied Ergonomics, 45 1087-1096.
Mok, H. S., Han, C. H., Jeon, C. S., Song, M. J., 2008, Design Principle for Disassembly of Products, Transaction of the Korean Society of Automotive Engineers, 16:6 48-57.
RS, 2008, Compact Type Hydraulic Cylinder, RS B 0157, Republic of Korea.