한국생산제조학회 학술지 영문 홈페이지
[ Papers ]
Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 31, No. 2, pp.134-139
ISSN: 2508-5107 (Online)
Print publication date 15 Apr 2022
Received 11 Jan 2022 Revised 23 Feb 2022 Accepted 17 Mar 2022
DOI: https://doi.org/10.7735/ksmte.2022.31.2.134

컴퓨터 비전 알고리즘을 기반으로 한 마이크로 드릴의 진직도 오차 측정

이득우a, * ; 시티 누르파딜라 빈티 자이니b
Measurement of Axial Straightness Error of Microdrill based on Computer Vision Algorithm
Deug-Woo Leea, * ; Siti Nurfadilah Binti Jainib
aDepartment of Nano Energy Engineering, Pusan National University
bDepartment of Nano Fusion Technology, Pusan National University

Correspondence to: *Tel.: +82-51-510-3129 E-mail address: dwoolee@pusan.ac.kr (Deug-Woo Lee).

Abstract

Microdrill machining is widely applied in various industries where structural design and material properties of the microdrill play a critical role during the machining. A composite microdrill composed of WC and polycrystalline diamond combines the wear resistance, toughness, and hardness properties of the cutting tool. However, composite microdrills are fabricated through complex processes which make them prone to geometrical errors. Hence, axial straightness error of microdrills was investigated in this study as a geometrical error. A computer vision algorithm was specifically developed for measuring the axial straightness error of the microdrill. Subsequently, the ability of the developed technique to perform precise and accurate measurement of tool geometrical errors was evaluated in this study.

Keywords:

Microdrill, Computer vision, Axial straightness error, Measurement system

Acknowledgments

이 연구는 부산대학교 기본연구지원사업(2년)에 의하여 연구되었음.

References

  • Zhang, S., Zhou, Y., Zhang, H., Xiong, Z., To, S., 2019, Advances in Ultra-precision Machining of Micro-structured Functional Surfaces and their Typical Applications, Int. J. Mach. Tools Manuf., 142 16-41. [https://doi.org/10.1016/j.ijmachtools.2019.04.009]
  • Li, Q., Zhan, G., Li, D., He, D., Moellendick, T. E., Gooneratne, C. P., Alalsayednassir, A. G., 2020, Ultrastrong Catalyst-free Polycrystalline Diamond, Sci. Rep., 10 22020. [https://doi.org/10.1038/s41598-020-79167-4]
  • Astakhov, V. P., Stanley, A., 2014, Polycrystalline Diamond (PCD) Tool Material: Emerging Applications, Problems, and Possible Solutions, In: Davim, J. (Eds) Traditional Machining Processes, Springer, Berlin, 1-32. [https://doi.org/10.1007/978-3-662-45088-8_1]
  • Katiyar, P. K., Singh, P. K., Singh, R., Kumar, A. L., 2016, Modes of Failure of Cemented Tungsten Carbide Tool Bits (WC/Co): A Study of Wear Parts, Int. J. Refract. Met. Hard Mat., 54 27-38. [https://doi.org/10.1016/j.ijrmhm.2015.06.018]
  • Dos Santos, A. G., da Silva, M. B., Jakcson, M. J., 2018, Tungsten Carbide Micro-tool Wear when Micro Milling UNS S32205 Duplex Stainless Steel, Wear, 414-415 109-117. [https://doi.org/10.1016/j.wear.2018.08.007]
  • Zheng, L. J., Wang, C. Y., Fu, L.Y., Yang, L. P., Qu, Y. P., Song, Y. X., 2012, Wear Mechanisms of Micro-drills during Dry High Speed Drilling of PCB, J. Mater. Process. Technol., 212 :10 1989-1997. [https://doi.org/10.1016/j.jmatprotec.2012.05.004]
  • Chuang, S. F., Chen, Y. C., Chang, W. T., Lin, C. C., Tarng, Y. S., 2010, Nondestructive Web Thickness Measurement of Micro-drills with an Integrated Laser Inspection System, Nondestruct. Test. Eval., 25:3 249-266. [https://doi.org/10.1080/10589751003637077]
  • Chang, W.-T., Wu, J.-H., 2016, An Innovative Optical-based Method and Automation System for Rapid and Non-destructive Measurement of the Web Thickness of Microdrills, Measurement, 94 388-405. [https://doi.org/10.1016/j.measurement.2016.07.071]
  • Green, G., 1828, An Essay on the Application of Mathematical Analysis to the Theories of Electricity and Magnetism, Wezäta-Melins Aktiebolag Sweden. [https://doi.org/10.48550/arXiv.0807.0088]
  • Deshrijver, G., Kerre, E. E., 2005, 8- Triangular Norms and Related Operators in L*-fuzzy Set Theory, In: Klement, E.P., Mesiar, R. (Eds.), Logical, Algebraic, Analytical and Probabilistic Aspects of Triangular Norms, Elsevier, 231-259. [https://doi.org/10.1016/B978-044451814-9/50008-2]
  • Beckwith, T. G., Marangoni, R. D., Lienhard, J. H., 2004, Mechanical Measurements, Fifth Edition, Pearson Education, Taiwan, 45-125.
Deug-Woo Lee

Professor in the Department of Nano Energy Engineering, Pusan National University.

His research interest is Tribology.

E-mail: dwoolee@pusan.ac.kr

Siti Nurfadilah Binti Jaini

Ph.D. student in the Department of Nano Fusion Technology, Pusan National University.

Her research interest is Application of artificial intelligence.

E-mail: nurfadilah249@gmail.com