전문가 듀플렉스 밀링 조건 설정의 비절삭음량 최소화 모델링
Abstract
In this study, a field expert with 20 years of experience used the auditory feedback from a milling process to optimize the conditions for a 20 mm diameter ball end mill from Company T. and a theoretical researcher attempted to fine a physical model of his method. By adjusting the transfer speed, processing depth, and rotation speed based on the milling sound, stable and productive conditions were achieved. The study defined the ratio between sound volume and material removal rate as specific cutting sound and found that setting processing conditions using field hearing aligned with the specific cutting sound volume minimization. Further, the insert’s plank wears were compared using the conditions set by the tool manufacturer, field expert, and specific cutting sound volume minimization. The expert's settings matched the specific cutting sound volume minimization conditions, resulting in approximately three times higher productivity than that with the manufacturer's conditions. However, the insert cracked.
Keywords:
Duplex, Ball end mill, Machining conditions, Specific cutting sound level, Material removal rate, Tool wearReferences
- Yoon, J. H., Yoo, J. T., Lee, H. S., 2019, Manufacturing of Superplastic Forming Parts from Duplex Stainless Steel, Proc. Korean Soc. Manuf. Technol. Eng. Spring Conf., 132.
-
Nomani, J., Pramanik, A., Hilditch, T., Littlefair, G., 2015, Chip Formation Mechanism and Machinability of Wrought Duplex Stainless Steel Alloys, Int. J. Adv. Manuf. Technol., 80 1127-1135.
[https://doi.org/10.1007/s00170-015-7113-3]
-
Ahmed, Y. S., Paiva, J. M., Bose, B., Veldhuis, S. C., 2019, New Observations on Built-up Edge Structures for Improving Machining Performance During the Cutting of Superduplex Stainless Steel, Tribol. Int., 137 212-227.
[https://doi.org/10.1016/j.triboint.2019.04.039]
-
Marques, D. C., Suyama, D. I., Antunes, R. A., Hassui, A., 2023, Influence of Machining Parameters on Tool Wear, Residual Stresses, and Corrosion Resistance after Milling Super Duplex Stainless Steel UNS S32750, Int. J. Adv. Manuf. Technol., 129 801-814.
[https://doi.org/10.1007/s00170-023-12328-7]
- Bagci, E., 2011, Monitoring and Analysis of MRR-based Feedrate Optimization Approach and Effects of Cutting Conditions using Acoustic Sound Pressure Level in Free-form Surface Milling, Sci. Res. Essays, 6:2 256-277.
-
Quintana, G., Ciurana, J., Inés, F., Rodríguez, C. A., 2009, Sound Mapping for Identification of Stability Lobe Diagrams in Milling Processes, Int. J. Mach. Tools Manuf., 49:3-4 203-211.
[https://doi.org/10.1016/j.ijmachtools.2008.11.008]
-
Rech, J., Dumont, F., Le Bot, A., Arrazola, P. J., 2017, Reduction of Noise During Milling Operations, CIRP J. Manuf. Sci. Technol., 18 39-44.
[https://doi.org/10.1016/j.cirpj.2016.09.001]
Student in the Graduate School of Convergence Science & Technology, Gyeongsang National University.His research interest is CNC Machining.
E-mail: js1116@hanmail.net
Student in the School of Mechanical Engineering, Gyeongsang National University.Her research interest is CNC Machining and Production Quality.
E-mail: subean0607@gnu.ac.kr
Student in the School of Mechanical Engineering, Gyeongsang National University.His research interest is CNC Machining and Machining Precision.
E-mail: mount7429@naver.com
Professor in the School of Mechanical and Aerospace Engineering, Gyeongsang National University.His research interest is CAM and CNC Machining.
E-mail: sujinkim@gnu.ac.kr