Home

Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 27 , No. 4

[Paper List] [ Prev] [Go to Volume List] [ Next]


[ Best Paper of This Month ]
Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 27, No. 4, pp. 307-316
Abbreviation: J. Korean Soc. Manuf. Technol. Eng.
ISSN: 2508-5107 (Online)
Print publication date 15 Aug 2018
Received 19 Jul 2018 Revised 03 Aug 2018 Accepted 06 Aug 2018
DOI: https://doi.org/10.7735/ksmte.2018.27.4.307
Self-Piercing Riveting을 이용한 알루미늄 합금과 Steel 강판의 다층 접합 연구
강유성^b ; 박지형^a ; 전용호^b ; 홍민성^b^{, *}


Study on the 3-layer Joining of Aluminum Alloy and Steel Plate Using Self-piercing Riveting
You-Sung Kang^b ; Ji-Hyoung Park^a ; Yongho Jeon^b ; Minsung Hong^b^{, *}
aDepartment of Mechanical Engineering, Graduate school of Mechanical Engineering, Ajou University, 206, World cup-ro, Yeongtong-gu, Suwon, Gyeonggi-do, 16499, Korea
bDepartment of Mechanical Engineering, Ajou University, 206, World cup-ro, Yeongtong-gu, Suwon, Gyeonggi-do, 16499, Korea
Correspondence to : ^*Tel.: +82-31-219-2526 Fax: +82-31-219-1611 E-mail address: mshong@ajou.ac.kr (Minsung Hong).



Funding Information ▼ Ministry of Science, ICT and Future Planning National Research Foundation of Korea NRF-2015R1C1A1A02036547

Abstract

Recently, several studies have been conducted in the automotive industry with the aim of improving fuel efficiency. In particular, lightweight materials have proved effective in improving both the performance and fuel economy of cars. In this study, we have investigated the joining of aluminum alloys (that are increasingly being used as lightweight materials in vehicles) using self-piercing riveting (SPR). Three sheets of the material were joined using SPR. The joining strength was assessed via a shear strength test. When the mechanical properties of the upper plate were constant, the shear strength increased with an increase in the mechanical properties of the intermediate plate. Evaluation of the joining strength with respect to the order of combination of the top and intermediate plates revealed a higher shear strength when the intermediate plate is stronger than the top plate.


Keywords: Self-piercing riveting, Multi material integration, Dissimilar joining, Multi layer joining, Shear strength

Acknowledgments

본 연구는 2015년도 정부(미래창조과학부)의 재원으로 한국연구재단의 지원을 받아 수행된 연구임(NRF-2015R1C1A1A02036547).

References


1.	Kim, M. G., Cho, S. S., Kim. D. Y., 2010, Assessment of Fatigue Life on curved Self-Piercing Rivet Joint Specimen, Journal of the Korean Society of Manufacturing Technology Engineering, 19:1 71-79.
2.	Kim, D. Y., Kim, D. O., Cheon S. S., 2018, Experimental Investigation on Fatigue Characteristics of SPR (Self-Piercing Rivet) and Hybrid Joints, Journal of the Korean Society for Precision Engineering, 35:3 335-340.
3.	Lee, M. Y., Jung, S. H., 2016, Trends of Advanced Multi-Material Technology for Light Materials based on Aluminum, Journal of Welding and Joining. 34:5 19-25.
4.	Yuan, W., Mishra, R. S., Webb, S., Chen, Y. L., Carlson, B., Herling, D. R., Grant, G. J., 2011, Effect of Tool Design and Process Parameters on Properties of Al Alloy 6016 Friction Stir Spot Welds, Journal of Materials Processing Technology 211:6 972-977.
5.	Jo, B. J., Kim, J. S., Yoo, H. S., Kim, I. J., Lee, S. H., Kim, Y. G., 2015, Characterization of Resistance Spot Welded Al5052/DP590 Dissimilar Materials and Processing Optimization, Journal of Welding and Joining. 33:2 56-61.
6.	Song, S. W., Kim, N. K., Kang, C. Y., 2009, Dissimilar Friction Stir Welding of Aluminum Alloys, Journal of the Korean Welding and Joining Society 10 10-15.
7.	Yu, M. H., Yu, C. H., Hong, D. P., Kim, C. S., Kim, Y. J., 2010, Study on the Mechanical and Surface Properties of Friction Welded Al Alloy 6061-T6 and 7075-T6, Journal of the Korean Society of Manufacturing Technology Engineering. 10 389-393.
8.	Pickin, C. G., Young, K., Tuersley, I., 2007, Joining of Lightweight Sandwich Sheets to Aluminum using Self-pierce Riveting, Materials & Design. 28:8 2361-2365.
9.	Jeon, N. K., Rhee, S. H. Kam, D. H., 2018, Parametric study of Self-Piercing Riveting for CFRP-Aluminum Dissimilar Joint, Journal of Materials Processing Technology. 171:1 10-20.
*10.*	Bollhoff Group, 2016, viewed 7 July 2018, Automation RIVSET Product Introduce Presentation, <https://www.boellhoff.com/de-en/index.php>.
*11.*	Park, J. H., Kang, Y. S., Lee, M. G., Jeon, Y. H., 2018, An Experimental study on the Joining of Carbon Fiber Reinforced Plastics and Steel Plate Using Self-Piercing Rivets, Journal of the Korean Society of Manufacturing Technology Engineering 27:3 211-217.
*12.*	Park, J. H., 2017, Self-Piercing Riveting of Dissimilar Metal Sheets, Master Thesis, Ajou University, Republic of Korea.