Journal Archive

Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 27 , No. 1

[Paper List] [Go to Volume List]


[ Article ]
Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 27, No. 1, pp. 27-34
Abbreviation: J. Korean Soc. Manuf. Technol. Eng.
ISSN: 2508-5107 (Online)
Print publication date 15 Feb 2018
Received 12 Oct 2017 Revised 22 Nov 2017 Accepted 04 Dec 2017
DOI: https://doi.org/10.7735/ksmte.2018.27.1.27
병렬 노즐 분사의 ITO 표면 포토레지스트 박리 조건에 관한 해석
김준현^a ; 고형호^a ; 이기성^b ; 주기태^b ; 김용성^b^{, *}


Investigation for Photoresist Stripping Conditions on the ITO Surface by the Multi-Spray Method
Joon Hyun Kim^a ; Hyoung Ho Ko^a ; Ki-Seong Lee^b ; Gi-Tae Joo^b ; Young Sung Kim^b^{, *}
aMechanical and Automotive Engineering, Seoul National University of Science & Technology, 232, Gongneung-ro, Nowon-gu, Seoul 01811, Korea
bGraduate School of NID Fusing Technology, Seoul National University of Science & Technology, 232, Gongneung-ro, Nowon-gu, Seoul 01811, Korea
Correspondence to : ^Tel.: +82-2-970-6804, Fax: +82-2-970-6011, E-mail address:*youngsk@seoultech.ac.kr (Young Sung Kim).



Funding Information ▼ Ministry of Trade, Industry and Energy 10052250

Abstract

Chemical stripping mechanisms are important because they are fundamentally involved in the rate of reaction of bonding and decomposition of materials. The stripping mechanism of a spray technology penetrates or removes a photoresist (PR) material on the indium tin oxide surface. It is the impact force produced by the velocity and mass of the stripper reaching the surface. The mechanisms in which a PR material is agitated or removed by proper liquid movement are dependent on material properties (e.g., viscosity) and conditions (e.g., temperature). Simple tests and numerical analysis have been conducted to determine the performance of a spray on PR materials exposed to a solution-type special stripper. The results performed to compare the impact force as varied by nozzle shape, spray distance, velocity, and flow rate to determine the relationship of the impact force to the performance in material removal.


Keywords: Aqueous stripper, ITO-Glass, Nozzle, Photoresist, Spray, Stripping process

Acknowledgments

이 연구는 2016년 청정생산기반전문기술개발사업 과제번호10052250의 연구비 지원으로 수행되었습니다.

References


1.	Moore, J. C., 2002, Successful Photoresist Removal: Incorporating Chemistry, Conditions, and Equipment, Proc. SPIE 4690, Advances in Resist Technology and Processing XIX 892-903.
2.	Kim, J. H., Kim, S. H., Jeong, B. H., Joo, G. T., Kim. Y. S., 2016, Green Photoresist Stripping Process with the Influence of Free Surface from Dip Withdrawal, Journal of the Korean Society of Manufacturing Technology Engineers, 25:1 14-20.
3.	Kim, J. H., Shim, J. M., Joo, G. T., Kim, Y. S., Jeong, B. H., 2016, An Efficient Photoresist Stripping Process on the ITO Surface Using the Dipping Method, Journal of the Korean Society of Manufacturing Technology Engineers, 25:4 281-289.
4.	Kim, J. H., Lee, J. H., Kang, T. S., Joo, G. T., Kim, Y. S., Jeong, B. H., Lee, D. W., 2017, Numerical Investigation of Factors Affecting Photoresist Stripping Process on the ITO Surface using the Spray Method, Journal of the Korean Society of Manufacturing Technology Engineers, 26:2 158-165.
5.	Nakahara, H., Takeuchi, Y., Hashimoto, R., Maruyama, T., Abe, H., 2004, Photoresist Stripping Composition and Process for Stripping Resist, US Patent: 6815150.
6.	Ikemoto, K., 2004, Photoresist Stripping Agent, US Patent: 0137379.
7.	Ikemoto, K., Yamamoto, Y., Yoshida, H., Maruyama, T., 2006, Photoresist Stripping Composition and Cleaning Composition, US Patent: 7049275.
8.	Choi, H. S., 2013, Photoresist Striping Compositions for Manufacturing Lcd, US Patent: 0345106.
9.	Lee, H. K., Lee, I. G., Park, M. J., Koo, K. K., Cho, Y. J., Cho, B. G., 2013, Technical Trend on the Recycling Technologies for Stripping Process Waste Solution by the Patent and Paper Analysis, Journal of the Korean Institute of Resources Recycling, 22:4 81-90.
*10.*	Eotech, Viewed 21 July 2017, <http://www.eotechkorea.com>.
*11.*	Ishimoto, J., Hoshina, H., Tsuchiyama, T., Watanabe, H., Haga, A., Sato, F., 2007, Integrated Simulation of the Atomization Process of a Liquid Jet Through a Cylindrical Nozzle, Interdisciplinary Information Sciences, 13:1 7-16.