Journal Archive

Journal of the Korean Society of Manufacturing Technology Engineers - Vol. 27 , No. 1

[Go to Volume List]

1. p. 1 Fabrication of Micro Tool Electrode by Micro EDM using Wear Ratio

In Yong Moon, Do Kwan Chung, Bo Hyun Kim
DOI: https://doi.org/10.7735/ksmte.2018.27.1.1

2. p. 7 Evaluation of Accelerated Life of High-temperature Deteriorated Rubber by Stress Relaxation

Sunghun Oh, Hong Seok Kim, Seong-Kyun Cheong, Ki-Hoon Shin
DOI: https://doi.org/10.7735/ksmte.2018.27.1.7

3. p. 14 Design of a Wave Power Generator with Multiple Buoys

Ock Hyun Kim, Jae Kuk Lee
DOI: https://doi.org/10.7735/ksmte.2018.27.1.14

4. p. 20 Patterning and Characterization of Micro-dimple Arrays on Metallic Surfaces by Laser-accelerated Flyer Impact

Jeong Hwan Lee, Dae Cheol Choi, Hong Seok Kim
DOI: https://doi.org/10.7735/ksmte.2018.27.1.20

5. p. 27 Investigation for Photoresist Stripping Conditions on the ITO Surface by the Multi-Spray Method

Joon Hyun Kim, Hyoung Ho Ko, Ki-Seong Lee, Gi-Tae Joo, Young Sung Kim
DOI: https://doi.org/10.7735/ksmte.2018.27.1.27

6. p. 35 A Study of Nut Loosening Inspection System using a Vision Machine Method

Suk Yong Lee, Ho Sung Kang, Min Chul Cha, Do Yeop Kim, Yong Geun Park, Hui Jong Jeong, Eung Suk Lee
DOI: https://doi.org/10.7735/ksmte.2018.27.1.35

7. p. 41 Study on the High Temperature Deformation of Incoloy 825 Alloy using an Artificial Neural Network

Shin-Hyung Song, Yongbae Kim, Seoung-Yong Lee
DOI: https://doi.org/10.7735/ksmte.2018.27.1.41

8. p. 46 Development of A Plate-type Cold Forging Manufacturing Process and Finite Element Analysis for Producing Thrust Washer of Automotive Engine

Bongki Kang, Joonghyun Yoon, Joono Cheong, Hyunhwan Jeong, Wonseok Lee, Suhee Han, Wonman Choi
DOI: https://doi.org/10.7735/ksmte.2018.27.1.46

9. p. 57 Laser Patterning of Deposited Layer for Protective Mask in Electrochemical Etching

Hong Shik Shin
DOI: https://doi.org/10.7735/ksmte.2018.27.1.57

10. p. 63 Experimental and Computational Analysis of Mass Sensor Structure

Won Woo Cho, Jongsung Sa, Taewon Kang
DOI: https://doi.org/10.7735/ksmte.2018.27.1.63

11. p. 70 A Study on Performance Prediction of Purging Device using CFD in Laser Welding of Titanium Sheet

Byeong-Ju Jin, Min-Ho Park, Tae-Jong Yun, Ill-Soo Kim, Ki-Young Park, Young Kim, Hae-Jin Yang
DOI: https://doi.org/10.7735/ksmte.2018.27.1.70

12. p. 76 Development of Variable Nozzle Automated System for Trisonic Wind Tunnel

Jihun Ko, Heejung Kim, Youngjoon Kim, Seongbeom Shin, Namgyun Kim
DOI: https://doi.org/10.7735/ksmte.2018.27.1.76

e-Submission

Search For Articles

Journal Archive

Society Office

Journal launch year : 1995
Frequency : 6 Issues per year
Online ISSN :2508-5107
DOI Prefix : 10.7735/ksmte
Copyright : The Korean Society of Manufacturing Technology Engineers
Publisher : Sungchul Jee
Editor-in-Chief : Seok min Kim
Office : Korean Society of Manufacturing Technology Engineers A - 1206 Centreville Asterium Seoul, 372, Hangang-daero, Yongsan-gu, Seoul 04323, Korea
E-mail : info@ksmte.kr
Homepage : https://ksmte.kr
Journal : http://Journal.ksmte.kr
e-Submisson : https://article.ksmte.kr
Tel : +82-2-772-9172
Fax : +82-2-501-9173
※ Manuscript editor, advertising, technical support receive : Hye-won Kim (Tel +82-2-772-9172)